[Asterisk-Users] Can't get G729 working after buying a license.

[Matthew Schumacher]

Michael D Schelin wrote:
> Call Digum. They support the license codec install.
> 
> Matthew Schumacher wrote:
> 
>> List,
>>
>> I purchased 2 g729 licenses but I can't get it to answer a g729 call
>> from a cisco router with a vwic card.  In the debug output below you
>> will see that asterisk thinks it only supports: (gsm|ulaw|alaw|h263)
>> when it should support g729 according to the config also listed below.
>>
>> The real odd thing is I can place g729 calls to the router, just not
>> from the router to *.  Anyone have any ideas on how to fix this?
>>
>> Another problem I am having is I want to use the info dtmf mode, but the
>> sip packet that asterisk sends does not announce info in the Allow
>> string.
>>
>> Thanks,
>> schu
>

Ok, I figured it out, * was not using the config under the [router]
context in the config file.  Once I enabled g729 in [general] it worked.
 So the question is why does * ignore this config for the 192.168.77.254
endpoint?

in sip.conf:
[router]
type=friend
context=default
host=192.168.77.254
dtmfmode=info
disallow=all
allow=g729
nat=no
canreinvite=yes
qualify=yes