[Asterisk-Users] Can't get G729 working after buying a license.

Michael D Schelin mike at shelcomm.com
Tue Aug 23 12:08:43 MST 2005


Call Digum. They support the license codec install.

Matthew Schumacher wrote:

>List,
>
>I purchased 2 g729 licenses but I can't get it to answer a g729 call
>from a cisco router with a vwic card.  In the debug output below you
>will see that asterisk thinks it only supports: (gsm|ulaw|alaw|h263)
>when it should support g729 according to the config also listed below.
>
>The real odd thing is I can place g729 calls to the router, just not
>from the router to *.  Anyone have any ideas on how to fix this?
>
>Another problem I am having is I want to use the info dtmf mode, but the
>sip packet that asterisk sends does not announce info in the Allow string.
>
>Thanks,
>schu
>
>in debug:
>20 headers, 13 lines
>Using latest request as basis request
>Sending to 192.168.77.254 : 5060 (non-NAT)
>Found no matching peer or user for '192.168.77.254:49206'
>Found RTP audio format 18
>Found RTP audio format 101
>Found RTP audio format 19
>Peer audio RTP is at port 192.168.77.254:16494
>Found description format G729
>Found description format telephone-event
>Found description format CN
>Capabilities: us - 0x8000e (gsm|ulaw|alaw|h263), peer - audio=0x100
>(g729)/video=0x0 (nothing), combined - 0x0 (nothing)
>Non-codec capabilities: us - 0x1 (g723), peer - 0x3 (g723|gsm), combined
>- 0x1 (g723)
>Aug 23 09:54:43 NOTICE[1379]: chan_sip.c:2792 process_sdp: No compatible
>codecs!
>Transmitting (no NAT):
>SIP/2.0 488 Not acceptable here
>Via: SIP/2.0/UDP 192.168.77.254:5060
>From: <sip:874 at 192.168.77.254>;tag=4194CB3C-F91
>To: <sip:9999 at 192.168.11.17>;tag=as4ebd30b1
>Call-ID: CB361638-133511DA-988CF03C-BF8FDD9A at 192.168.77.254
>CSeq: 101 INVITE
>User-Agent: Asterisk PBX
>Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER
>Contact: <sip:9999 at 192.168.11.17>
>Content-Length: 0
>
>in sip.conf:
>[router]
>type=friend
>context=default
>host=192.168.77.254
>dtmfmode=info
>disallow=all
>allow=g729
>nat=no
>canreinvite=yes
>qualify=yes
>
>in debug:
>[codec_g729a.so] => (Annex A/B (floating point) G.729/PCM16 Codec
>Translator)
>  == G.729 Host-ID:
>xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx
>  == Found license 'G729-XXXXXXXX' providing 2 channels
>  == Found total of 2 G.729 licenses
>  == Registered translator 'g729tolin' from format g729 to slin, cost 2
>  == Registered translator 'lintog729' from format slin to g729, cost 11
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>  
>



More information about the asterisk-users mailing list