[Asterisk-Users] Unable to create channel of type 'Zap'

[root linux]

I am using TE110P E1 Card and using the wcte11xp
driver.

Here is my "ztcfg -vvv" result: -

Zaptel Configuration
======================

SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet
(DSX-1)

Channel map:

Channel 01: Individual Clear channel (Default)
(Slaves: 01)
Channel 02: Individual Clear channel (Default)
(Slaves: 02)
Channel 03: Individual Clear channel (Default)
(Slaves: 03)
Channel 04: Individual Clear channel (Default)
(Slaves: 04)
Channel 05: Individual Clear channel (Default)
(Slaves: 05)
Channel 06: Individual Clear channel (Default)
(Slaves: 06)
Channel 07: Individual Clear channel (Default)
(Slaves: 07)
Channel 08: Individual Clear channel (Default)
(Slaves: 08)
Channel 09: Individual Clear channel (Default)
(Slaves: 09)
Channel 10: Individual Clear channel (Default)
(Slaves: 10)
Channel 11: Individual Clear channel (Default)
(Slaves: 11)
Channel 12: Individual Clear channel (Default)
(Slaves: 12)
Channel 13: Individual Clear channel (Default)
(Slaves: 13)
Channel 14: Individual Clear channel (Default)
(Slaves: 14)
Channel 15: Individual Clear channel (Default)
(Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Individual Clear channel (Default)
(Slaves: 17)
Channel 18: Individual Clear channel (Default)
(Slaves: 18)
Channel 19: Individual Clear channel (Default)
(Slaves: 19)
Channel 20: Individual Clear channel (Default)
(Slaves: 20)
Channel 21: Individual Clear channel (Default)
(Slaves: 21)
Channel 22: Individual Clear channel (Default)
(Slaves: 22)
Channel 23: Individual Clear channel (Default)
(Slaves: 23)
Channel 24: Individual Clear channel (Default)
(Slaves: 24)
Channel 25: Individual Clear channel (Default)
(Slaves: 25)
Channel 26: Individual Clear channel (Default)
(Slaves: 26)
Channel 27: Individual Clear channel (Default)
(Slaves: 27)
Channel 28: Individual Clear channel (Default)
(Slaves: 28)
Channel 29: Individual Clear channel (Default)
(Slaves: 29)
Channel 30: Individual Clear channel (Default)
(Slaves: 30)
Channel 31: Individual Clear channel (Default)
(Slaves: 31)

31 channels configured.



--- Bob Goddard <asterisk at bgcomp.co.uk> wrote:

> On Monday 22 Aug 2005 04:30, root linux wrote:
> > My zaptel.conf config: -
> >
> > # Below setting is for E1
> > span=1,1,0,cas,hdb3
> > bchan=1-15
> > bchan=17-31
> > dchan=16
> >
> > loadzone = us
> > defaultzone=us
> 
> You do not appear to be in the US but Malaysia. Not
> sure what these
> should be.
> 
> > My zapata.conf config: -
> >
> > # Below setting is for E1
> > switchtype = national
> > signalling = pri_cpe
> > group = 1
> > channel => 1-15
> > channel => 17-31
> >
> > My extension.conf config: -
> >
> > [default]
> > exten => 181,1,Dial(Zap/1/181)
> 
> This is better to be "exten =>
> 181,1,Dial(Zap/g1/181)",
> at least as a test.
> 
> Are the kernel modules loaded?
> What kind of E1 card do you have?
> What does "ztcfg -vvv" tell you?
> You may also want to check out zttool.
> 
> 
> B
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> 



		
____________________________________________________
Start your day with Yahoo! - make it your home page 
http://www.yahoo.com/r/hs