[Asterisk-Users] Unable to create channel of type 'Zap'

[Bob Goddard]

On Monday 22 Aug 2005 04:30, root linux wrote:
> My zaptel.conf config: -
>
> # Below setting is for E1
> span=1,1,0,cas,hdb3
> bchan=1-15
> bchan=17-31
> dchan=16
>
> loadzone = us
> defaultzone=us

You do not appear to be in the US but Malaysia. Not sure what these
should be.

> My zapata.conf config: -
>
> # Below setting is for E1
> switchtype = national
> signalling = pri_cpe
> group = 1
> channel => 1-15
> channel => 17-31
>
> My extension.conf config: -
>
> [default]
> exten => 181,1,Dial(Zap/1/181)

This is better to be "exten => 181,1,Dial(Zap/g1/181)",
at least as a test.

Are the kernel modules loaded?
What kind of E1 card do you have?
What does "ztcfg -vvv" tell you?
You may also want to check out zttool.


B