[Asterisk-Users] TE110P problem

[Guy C. Guckenberger]

Is there a way to reset these hung channels without restarting Asterisk?



-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Peter
Svensson
Sent: Monday, August 22, 2005 1:24 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] TE110P problem

On Mon, 22 Aug 2005, Guy C. Guckenberger wrote:

> Im using a TE110P as a trunk to a Panasonic KD-500 everything works 
> well.....but  Im having this problem where one of the channels becomes

> blocked with a partial phone number after about two days.  So if the 
> channel that becomes blocked is channels 23 no calls can get in.  If 
> the channel that gets blocked is 22 then one call can get in. The only

> way to clear this is to reboot the server.
>  
> This is the line in the log that seems to indicate what is going on.
>  
> Aug 17 17:24:10 VERBOSE[1057]: -- Extension '6' in context 'from-pstn'
> from '4093' does not exist. Rejecting call on channel 0/23, span 1
>  
> The correct ext should be 6xxx.  So apparently the Panasonic passed 
> just a 6 and Asterisk is complaining.

If you can handle the logging volume you can turn on "pri debug span 1"
or even "pri intense debug span 1" and log all isdn messages. The logs
may give you some clues as to what goes wrong, and who stops responding.
Alos do a "show channels" to get an overall status and a "zap show
channel xx" 
on the hung channel.

Peter


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users