[Asterisk-Users] ISDN DID

Panitaxx panitaxx at gmail.com
Thu Aug 11 09:26:15 MST 2005 

Hello ,

Thank you for every response. It was the telcos fault. They told me
they were sending it, but they wer not.

regards,

ia

On 8/10/05, Johann Steinwendtner <johann.steinwendtner at utanet.at> wrote:
> There is no called party ie but sending complete ie included in the
> setup message. Hence, it tries to terminate.
> 
> 
> Best regards
> Hans
> 
> Paul Belanger schrieb:
> > Where are your calls coming from?  Are you connected to the Telco or PBX?
> >
> > PB
> >
> > Panitaxx wrote:
> >
> >> Hi,
> >>
> >> thanks for your response. here is the log of one call:
> >>
> >> Enabled debugging on span 1
> >>
> >> Asterisk*CLI>
> >> < Protocol Discriminator: Q.931 (8)  len=33
> >> < Call Ref: len= 2 (reference 72/0x48) (Originator)
> >> < Message type: SETUP (5)
> >> < [a1]
> >> < Sending Complete (len= 1)
> >> < [04 03 90 90 a3]
> >> < Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer
> >> capability: 3.1kHz audio (16)
> >> <                              Ext: 1  Trans mode/rate: 64kbps,
> >> circuit-mode (16)
> >> <                              Ext: 1  User information layer 1: A-Law
> >> (35)
> >> < [18 03 a9 83 8d]
> >> < Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0,
> >> Exclusive Dchan: 0
> >> <                        ChanSel: Reserved
> >> <                       Ext: 1  Coding: 0   Number Specified   Channel
> >> Type: 3
> >> <                       Ext: 1  Channel: 13 ]
> >> < [1e 02 84 83]
> >> < Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard
> >> (0) 0: 0   Location: Public network serving the remote user (4)
> >> <                               Ext: 1  Progress Description: Calling
> >> equipment is non-ISDN. (3) ]
> >> < [6c 0b 00 83 39 31 35 34 35 31 39 30 30]
> >> < Calling Number (len=13) [ Ext: 0  TON: Unknown Number Type (0)  NPI:
> >> Unknown Number Plan (0)
> >> <                           Presentation: Presentation allowed of
> >> network provided number (3) '915451900' ]
> >> -- Making new call for cr 72
> >> -- Processing Q.931 Call Setup
> >> -- Processing IE 161 (cs0, Sending Complete)
> >> -- Processing IE 4 (cs0, Bearer Capability)
> >> -- Processing IE 24 (cs0, Channel Identification)
> >> -- Processing IE 30 (cs0, Progress Indicator)
> >> -- Processing IE 108 (cs0, C
> >> alling Party Number)
> >>     -- Going to extension s|1 because of Complete received
> >>
> >>
> >>> Protocol Discriminator: Q.931 (8)  len=10
> >>> Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
> >>> Message type: CALL PROCEEDING (2)
> >>> [18 03 a9 83 8d]
> >>> Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0,
> >>> Exclusive Dchan: 0
> >>>                       ChanSel: Reserved
> >>>                      Ext: 1  Coding: 0   Number Specified   Channel
> >>> Type: 3
> >>>                      Ext: 1  Channel: 13 ]
> >>
> >>
> >>     -- Accepting call from '915451900' to 's' on channel 0/13, span 1
> >>
> >> Asterisk*CLI>     -- Executing Playback("Zap/13-1",
> >> "vm-intro|noanswer") in new stack
> >>
> >>
> >>> Protocol Discriminator: Q.931 (8)  len=9
> >>> Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
> >>> Message type: PROGRESS (3)
> >>> [1e 02 81 88]
> >>> Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard
> >>> (0) 0: 0   Location: Private network serving the local user (1)
> >>>                              Ext: 1  Progress Description: Inband
> >>> information or appropriate pattern now available. (8) ]
> >>
> >>
> >>     -- Playing 'vm-intro' (language 'es')
> >>
> >> Asterisk*CLI>     -- Executing Playback("Zap/13-1", "vm-goodbye") in
> >> new stack
> >>
> >>
> >>> Protocol Discriminator: Q.931 (8)  len=14
> >>> Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
> >>> Message type: CONNECT (7)
> >>> [18 03 a9 83 8d]
> >>> Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0,
> >>> Exclusive Dchan: 0
> >>>                       ChanSel: Reserved
> >>>                      Ext: 1  Coding: 0   Number Specified   Channel
> >>> Type: 3
> >>>                      Ext: 1  Channel: 13 ]
> >>> [1e 02 81 82]
> >>> Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard
> >>> (0) 0: 0   Location: Private network serving the local user (1)
> >>>                              Ext: 1  Progress Description: Called
> >>> equipment is non-ISDN. (2) ]
> >>
> >>
> >>     -- Playing 'vm-goodbye' (language 'es')
> >>
> >> Asterisk*CLI>
> >> < Protocol Discriminator: Q.931 (8)  len=5
> >> < Call Ref: len= 2 (reference 72/0x48) (Originator)
> >> < Message type: CONNECT ACKNOWLEDGE (15)
> >>     -- Executing NoOp("Zap/13-1", "") in new stack
> >>     -- Executing Hangup("Zap/13-1", "") in new stack
> >>   == Spawn extension (primario, s, 4) exited non-zero on 'Zap/13-1'
> >>
> >> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate Active
> >>
> >>> Protocol Discriminator: Q.931 (8)  len=9
> >>> Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
> >>> Message type: DISCONNECT (69)
> >>> [08 02 81 90]
> >>> Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0
> >>> Location: Private network serving the local user (1)
> >>>                 Ext: 1  Cause: Normal Clearing (16), class = Normal
> >>> Event (1) ]
> >>
> >>
> >>     -- Hungup 'Zap/13-1'
> >>
> >> Asterisk*CLI>
> >> On 8/9/05, jj <jjones at quiddesign.com> wrote:
> >>
> >>> What does pri debug span 1 show?
> >>>
> >>> On Aug 9, 2005, at 5:02 PM, Panitaxx wrote:
> >>>
> >>>
> >>>> Hello,
> >>>>
> >>>> I have an ISDN PRI E1. For some reason I am not receiving the did
> >>>> number so every call can only go to s exten. I have tried using _X.
> >>>> exten. Also I have immediate=no in zapata.conf. Any hint?
> >>>>
> >>>> thanks in advance,
> >>>>
> >>>> Iván Aponte
> >>>> _______________________________________________
> >>>> Asterisk-Users mailing list
> >>>> Asterisk-Users at lists.digium.com
> >>>> http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>> To UNSUBSCRIBE or update options visit:
> >>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>
> >>>
> >>> _______________________________________________
> >>> Asterisk-Users mailing list
> >>> Asterisk-Users at lists.digium.com
> >>> http://lists.digium.com/mailman/listinfo/asterisk-users
> >>> To UNSUBSCRIBE or update options visit:
> >>>   http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>
> >>
> >> _______________________________________________
> >> Asterisk-Users mailing list
> >> Asterisk-Users at lists.digium.com
> >> http://lists.digium.com/mailman/listinfo/asterisk-users
> >> To UNSUBSCRIBE or update options visit:
> >>    http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >>
> >>
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> >
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

More information about the asterisk-users mailing list