[Asterisk-Users] ISDN DID

Tue Aug 9 16:48:52 MST 2005

Nope I do not see the DID number coming across. Are you positive the  
telco has you configured for DID? This would be normal if not.

On Aug 9, 2005, at 5:20 PM, Panitaxx wrote:

> Hi,
>
> thanks for your response. here is the log of one call:
>
> Enabled debugging on span 1
>
> Asterisk*CLI>
>
> < Protocol Discriminator: Q.931 (8)  len=33
> < Call Ref: len= 2 (reference 72/0x48) (Originator)
> < Message type: SETUP (5)
> < [a1]
> < Sending Complete (len= 1)
> < [04 03 90 90 a3]
> < Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer
> capability: 3.1kHz audio (16)
> <                              Ext: 1  Trans mode/rate: 64kbps,
> circuit-mode (16)
> <                              Ext: 1  User information layer 1: A- 
> Law (35)
> < [18 03 a9 83 8d]
> < Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0,
> Exclusive Dchan: 0
> <                        ChanSel: Reserved
> <                       Ext: 1  Coding: 0   Number Specified    
> Channel Type: 3
> <                       Ext: 1  Channel: 13 ]
> < [1e 02 84 83]
> < Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard
> (0) 0: 0   Location: Public network serving the remote user (4)
> <                               Ext: 1  Progress Description: Calling
> equipment is non-ISDN. (3) ]
> < [6c 0b 00 83 39 31 35 34 35 31 39 30 30]
> < Calling Number (len=13) [ Ext: 0  TON: Unknown Number Type (0)  NPI:
> Unknown Number Plan (0)
> <                           Presentation: Presentation allowed of
> network provided number (3) '915451900' ]
> -- Making new call for cr 72
> -- Processing Q.931 Call Setup
> -- Processing IE 161 (cs0, Sending Complete)
> -- Processing IE 4 (cs0, Bearer Capability)
> -- Processing IE 24 (cs0, Channel Identification)
> -- Processing IE 30 (cs0, Progress Indicator)
> -- Processing IE 108 (cs0, C
> alling Party Number)
>     -- Going to extension s|1 because of Complete received
>
>
>> Protocol Discriminator: Q.931 (8)  len=10
>> Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
>> Message type: CALL PROCEEDING (2)
>> [18 03 a9 83 8d]
>> Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0,  
>> Exclusive Dchan: 0
>>                        ChanSel: Reserved
>>                       Ext: 1  Coding: 0   Number Specified    
>> Channel Type: 3
>>                       Ext: 1  Channel: 13 ]
>>
>     -- Accepting call from '915451900' to 's' on channel 0/13, span 1
>
> Asterisk*CLI>
>     -- Executing Playback("Zap/13-1", "vm-intro|noanswer") in new  
> stack
>
>
>> Protocol Discriminator: Q.931 (8)  len=9
>> Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
>> Message type: PROGRESS (3)
>> [1e 02 81 88]
>> Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard  
>> (0) 0: 0   Location: Private network serving the local user (1)
>>                               Ext: 1  Progress Description: Inband  
>> information or appropriate pattern now available. (8) ]
>>
>     -- Playing 'vm-intro' (language 'es')
>
> Asterisk*CLI>
>     -- Executing Playback("Zap/13-1", "vm-goodbye") in new stack
>
>
>> Protocol Discriminator: Q.931 (8)  len=14
>> Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
>> Message type: CONNECT (7)
>> [18 03 a9 83 8d]
>> Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0,  
>> Exclusive Dchan: 0
>>                        ChanSel: Reserved
>>                       Ext: 1  Coding: 0   Number Specified    
>> Channel Type: 3
>>                       Ext: 1  Channel: 13 ]
>> [1e 02 81 82]
>> Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard  
>> (0) 0: 0   Location: Private network serving the local user (1)
>>                               Ext: 1  Progress Description: Called  
>> equipment is non-ISDN. (2) ]
>>
>     -- Playing 'vm-goodbye' (language 'es')
>
> Asterisk*CLI>
>
> < Protocol Discriminator: Q.931 (8)  len=5
> < Call Ref: len= 2 (reference 72/0x48) (Originator)
> < Message type: CONNECT ACKNOWLEDGE (15)
>     -- Executing NoOp("Zap/13-1", "") in new stack
>     -- Executing Hangup("Zap/13-1", "") in new stack
>   == Spawn extension (primario, s, 4) exited non-zero on 'Zap/13-1'
>
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate  
> Active
>
>> Protocol Discriminator: Q.931 (8)  len=9
>> Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
>> Message type: DISCONNECT (69)
>> [08 02 81 90]
>> Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0    
>> Location: Private network serving the local user (1)
>>                  Ext: 1  Cause: Normal Clearing (16), class =  
>> Normal Event (1) ]
>>
>     -- Hungup 'Zap/13-1'
>
> Asterisk*CLI>
>
> On 8/9/05, jj <jjones at quiddesign.com> wrote:
>
>> What does pri debug span 1 show?
>>
>> On Aug 9, 2005, at 5:02 PM, Panitaxx wrote:
>>
>>
>>> Hello,
>>>
>>> I have an ISDN PRI E1. For some reason I am not receiving the did
>>> number so every call can only go to s exten. I have tried using _X.
>>> exten. Also I have immediate=no in zapata.conf. Any hint?
>>>
>>> thanks in advance,
>>>
>>> Iván Aponte
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>