[Asterisk-Users] Build on Itanium fails

Jonas Arndt jonas_arndt at comcast.net
Tue Aug 9 10:59:05 MST 2005 

Hi Zoa,

Nope, I didn't. I thought I was VERY clear on that point. What I did was 
following the guidlines in the "An introduction to Asterisk" document.It 
told me to create certain conf files in /etc/asterisk and then start it, 
which I did.

In any case, I find it EXTREMELY hard to believe that an application 
should SegFault from missing configuration files. There's gotta be 
something else going on here, wouldn't you agree?

// Jonas

Zoa wrote:

>
> Did you ever try asterisk on a non itanium ?
>
> You dont have a single configuration file on  your machine, of course it
> doesnt work :p
>
> zoa
>
> Jonas Arndt wrote:
>
>> Hi,
>>
>> The story never ends.... After a succesful buld without gsm codec, I
>> installed it and ran:
>>
>> itanium:/etc/asterisk # /usr/sbin/asterisk -cvvv
>>  == Parsing '/etc/asterisk/asterisk.conf': Not found (No such file or
>> directory)
>>  == Parsing '/etc/asterisk/extconfig.conf': Not found (No such file or
>> directory)
>> Asterisk CVS-HEAD, Copyright (C) 1999 - 2005 Digium.
>> Written by Mark Spencer <markster at digium.com>
>> ========================================================================= 
>>
>>  == Parsing '/etc/asterisk/logger.conf': Not found (No such file or
>> directory)
>> Asterisk Event Logger Started /var/log/asterisk/event_log
>> Asterisk Dynamic Loader loading preload modules:
>>  == Parsing '/etc/asterisk/modules.conf': Found
>>  == Manager registered action Ping
>>  == Manager registered action Events
>>  == Manager registered action Logoff
>>  == Manager registered action Hangup
>>  == Manager registered action Status
>>  == Manager registered action Setvar
>>  == Manager registered action Getvar
>>  == Manager registered action Redirect
>>  == Manager registered action Originate
>>  == Manager registered action Command
>>  == Manager registered action ExtensionState
>>  == Manager registered action AbsoluteTimeout
>>  == Manager registered action MailboxStatus
>>  == Manager registered action MailboxCount
>>  == Manager registered action ListCommands
>>  == Parsing '/etc/asterisk/manager.conf': Not found (No such file or
>> directory)
>>  == Parsing '/etc/asterisk/cdr.conf': Not found (No such file or
>> directory)
>>  == Parsing '/etc/asterisk/rtp.conf': Not found (No such file or
>> directory)
>>  == RTP Allocating from port range 5000 -> 31000
>> Asterisk PBX Core Initializing
>> Registering builtin applications:
>> [AbsoluteTimeout]
>>  == Registered application 'AbsoluteTimeout'
>> [Answer]
>>  == Registered application 'Answer'
>> [BackGround]
>>  == Registered application 'BackGround'
>> [Busy]
>>  == Registered application 'Busy'
>> [Congestion]
>>  == Registered application 'Congestion'
>> [DigitTimeout]
>>  == Registered application 'DigitTimeout'
>> [Goto]
>>  == Registered application 'Goto'
>> [GotoIf]
>>  == Registered application 'GotoIf'
>> [GotoIfTime]
>>  == Registered application 'GotoIfTime'
>> [ExecIfTime]
>>  == Registered application 'ExecIfTime'
>> [Hangup]
>>  == Registered application 'Hangup'
>> [NoOp]
>>  == Registered application 'NoOp'
>> [Prefix]
>>  == Registered application 'Prefix'
>> [Progress]
>>  == Registered application 'Progress'
>> [ResetCDR]
>>  == Registered application 'ResetCDR'
>> [ResponseTimeout]
>>  == Registered application 'ResponseTimeout'
>> [Ringing]
>>  == Registered application 'Ringing'
>> [SayNumber]
>>  == Registered application 'SayNumber'
>> [SayDigits]
>>  == Registered application 'SayDigits'
>> [SayAlpha]
>>  == Registered application 'SayAlpha'
>> [SayPhonetic]
>>  == Registered application 'SayPhonetic'
>> [SetAccount]
>>  == Registered application 'SetAccount'
>> [SetAMAFlags]
>>  == Registered application 'SetAMAFlags'
>> [SetGlobalVar]
>>  == Registered application 'SetGlobalVar'
>> [SetLanguage]
>>  == Registered application 'SetLanguage'
>> [Set]
>>  == Registered application 'Set'
>> [SetVar]
>>  == Registered application 'SetVar'
>> [ImportVar]
>>  == Registered application 'ImportVar'
>> [StripMSD]
>>  == Registered application 'StripMSD'
>> [Suffix]
>>  == Registered application 'Suffix'
>> [Wait]
>>  == Registered application 'Wait'
>> [WaitExten]
>>  == Registered application 'WaitExten'
>> Asterisk Dynamic Loader Starting:
>>  == Parsing '/etc/asterisk/modules.conf': Found
>> [chan_modem.so] => (Generic Voice Modem Driver)
>>  == Parsing '/etc/asterisk/modem.conf': Found
>>  == Loading modem driver chan_modem_aopen.so => (A/Open (Rockwell
>> Chipset) ITU-2 VoiceModem Driver)
>>  == Registered channel type 'Modem' (Generic Voice ModemChannel Driver)
>> [res_musiconhold.so] => (Music On Hold Resource)
>>  == Registered application 'MusicOnHold'
>>  == Registered application 'WaitMusicOnHold'
>>  == Registered application 'SetMusicOnHold'
>>  == Registered application 'StartMusicOnHold'
>>  == Registered application 'StopMusicOnHold'
>>  == Parsing '/etc/asterisk/musiconhold.conf': Not found (No such file
>> or directory)
>> [res_agi.so] => (Asterisk Gateway Interface (AGI))
>>  == Registered application 'DeadAGI'
>>  == Registered application 'EAGI'
>>  == Registered application 'AGI'
>> [res_adsi.so] => (ADSI Resource)
>>  == Parsing '/etc/asterisk/adsi.conf': Not found (No such file or
>> directory)
>> [res_features.so] => (Call Features Resource)
>>  == Parsing '/etc/asterisk/features.conf': Not found (No such file or
>> directory)
>>  == Parsing '/etc/asterisk/parking.conf': Not found (No such file or
>> directory)
>>    -- Registered extension context 'parkedcalls'
>>    -- Added extension '700' priority 1 to parkedcalls
>>  == Registered application 'ParkedCall'
>>  == Registered application 'Park'
>>  == Manager registered action ParkedCalls
>> [res_crypto.so] => (Cryptographic Digital Signatures)
>>    -- Loaded PUBLIC key 'iaxtel'
>>    -- Loaded PUBLIC key 'freeworlddialup'
>> [res_indications.so] => (Indications Configuration)
>>  == Parsing '/etc/asterisk/indications.conf': Not found (No such file
>> or directory)
>>  == Registered application 'PlayTones'
>>  == Registered application 'StopPlayTones'
>> [res_monitor.so] => (Call Monitoring Resource)
>>  == Registered application 'Monitor'
>>  == Registered application 'StopMonitor'
>>  == Registered application 'ChangeMonitor'
>>  == Manager registered action Monitor
>>  == Manager registered action StopMonitor
>>  == Manager registered action ChangeMonitor
>> [chan_sip.so] => (Session Initiation Protocol (SIP))
>>  == Registered channel type 'SIP' (Session Initiation Protocol (SIP))
>>  == Parsing '/etc/asterisk/sip.conf': Not found (No such file or
>> directory)
>>  == Unregistered channel type 'SIP'
>> Segmentation fault
>> itanium:/etc/asterisk
>> #
>>
>>
>> As you can see it ended with a SegFault.
>>
>> Any ideas? Did anybody build successfully on Itanium?
>>
>> Thanks,
>>
>> // Jonas
>>
>>
>>
>> Hi Again,
>>
>> I removed codec_gsm.so from codecs/Makefile and the build work. Like I
>> said, I am not too familiar with Asterisk yet. What implications will
>> this have to the functionality?
>>
>> Thanks,
>>
>> // Jonas
>>
>>
>>
>> Jonas Arndt wrote:
>>
>>> Thanks Guys,
>>>
>>> I should have mentioned that I have already tried to remove the flag.
>>> What happens then is that I run into other issues.
>>>
>>> ========================================================================= 
>>>
>>>
>>> gcc -pipe  -Wall -Wstrict-prototypes -Wmissing-prototypes
>>> -Wmissing-declarations
>>> -g  -Iinclude -I../include -D_REENTRANT -D_GNU_SOURCE  -O6
>>> -DZAPTEL_OPTIMIZAT
>>> IONS          -fomit-frame-pointer  -fPIC     -c
>>> -DNeedFunctionPrototypes=1 -fun
>>> roll-loops -fPIC -O6  -DSASR -DNDEBUG    -DWAV49   -I./inc src/table.c
>>> as   -o src/k6opt.o src/k6opt.s
>>> src/k6opt.s: Assembler messages:
>>> src/k6opt.s:9: Error: unknown pseudo-op: `.value'
>>> src/k6opt.s:10: Error: unknown pseudo-op: `.value'
>>> src/k6opt.s:11: Error: unknown pseudo-op: `.value'
>>> src/k6opt.s:12: Error: unknown pseudo-op: `.value'
>>> src/k6opt.s:13: Error: unknown pseudo-op: `.value'
>>> src/k6opt.s:14: Error: unknown pseudo-op: `.value'
>>> src/k6opt.s:15: Error: unknown pseudo-op: `.value'
>>> src/k6opt.s:16: Error: unknown pseudo-op: `.value'
>>> src/k6opt.s:17: Error: unknown pseudo-op: `.value'
>>> src/k6opt.s:18: Error: unknown pseudo-op: `.value'
>>> src/k6opt.s:19: Error: unknown pseudo-op: `.value'
>>> src/k6opt.s:20: Error: unknown pseudo-op: `.value'
>>> src/k6opt.s:27: Error: Unknown opcode `pushl %ebp'
>>> src/k6opt.s:28: Error: bad expression
>>> src/k6opt.s:28: Error: Illegal operandseparator `e'
>>> src/k6opt.s:29: Error: Unknown opcode `pushl %edi'
>>> src/k6opt.s:30: Error: Unknown opcode `pushl %esi'
>>> src/k6opt.s:31: Error: Unknown opcode `pushl %ebx'
>>> src/k6opt.s:32: Error: Illegal operand separator `('
>>> src/k6opt.s:33: Error: Illegal operand separator `('
>>> src/k6opt.s:34: Error: bad expression
>>> src/k6opt.s:34: Error: Illegal operand separator `e'
>>> src/k6opt.s:35: Error: Unknown opcode `emms'
>>> src/k6opt.s:36: Error: bad expression
>>> src/k6opt.s:36: Error: Illegal operand separator `e'
>>> src/k6opt.s:36: Error: Unknown opcode `movd %eax,%mm5'
>>> src/k6opt.s:37: Error: Unknown opcode `movq coefs,%mm1'
>>> src/k6opt.s:38: Error: Unknown opcode `movq coefs+8,%mm2'
>>> src/k6opt.s:39: Error: Unknown opcode `movq coefs+16,%mm3'
>>> src/k6opt.s:40: Error: Unknown opcode `xorl %esi,%esi'
>>> src/k6opt.s:43: Error: Unknown opcode `movq (%ebx,%esi,2),%mm0'
>>> src/k6opt.s:44: Error: Unknown opcode `pmaddwd %mm1,%mm0'
>>> src/k6opt.s:46: Error: Unknown opcode `movq 8(%ebx,%esi,2),%mm4'
>>> src/k6opt.s:47: Error: Unknown opcode `pmaddwd %mm2,%mm4'
>>> src/k6opt.s:48: Error: Unknown opcode `paddd %mm4,%mm0'
>>> src/k6opt.s:50: Error: Unknown opcode `movq 16(%ebx,%esi,2),%mm4'
>>> src/k6opt.s:51: Error: Unknown opcode `pmaddwd %mm3,%mm4'
>>> src/k6opt.s:52: Error: Unknown opcode `paddd %mm4,%mm0'
>>> ========================================================================= 
>>>
>>>
>>>
>>> Thanks,
>>>
>>> // Jonas
>>>
>>> Kevin P. Fleming wrote:
>>>
>>>> Jonas Arndt wrote:
>>>>
>>>>> The problem I am currently facing seem to be in the codecs/gsm
>>>>> directory. I am getting the error:
>>>>> ===============================================================
>>>>> make[2]: Entering directory `/usr/src/asterisk/codecs/gsm'
>>>>> if [ ! -d ./lib ] ; then mkdir ./lib ; fi
>>>>> gcc -pipe  -Wall -Wstrict-prototypes -Wmissing-prototypes
>>>>> -Wmissing-declarations -g  -Iinclude -I../include -D_REENTRANT
>>>>> -D_GNU_SOURCE  -O6   -DZAPTEL_OPTIMIZATIONS
>>>>> -fomit-frame-pointer  -fPIC     -c -DNeedFunctionPrototypes=1
>>>>> -funroll-loops -fPIC -O6 -march=ia64 -DSASR -DNDEBUG    -DWAV49
>>>>> -I./inc src/add.c
>>>>> cc1: error: invalid option `arch=ia64'
>>>>> ===============================================================
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> The GSM Makefile is somewhat stupid in this regard; it also fails on
>>>> x86-64 machines. I'd suggest just editing codecs/gsm/Makefile to
>>>> remove the 'arch' flag, since it really won't make a big difference,
>>>> especially if you aren't doing GSM transcoding.
>>>> _______________________________________________
>>>> Asterisk-Users mailing list
>>>> Asterisk-Users at lists.digium.com
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>> To UNSUBSCRIBE or update options visit:
>>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

More information about the asterisk-users mailing list