[Asterisk-Users] Build on Itanium fails

Tue Aug 9 10:43:15 MST 2005

Did you ever try asterisk on a non itanium ?

You dont have a single configuration file on  your machine, of course it
doesnt work :p

zoa

Jonas Arndt wrote:

> Hi,
>
> The story never ends.... After a succesful buld without gsm codec, I
> installed it and ran:
>
> itanium:/etc/asterisk # /usr/sbin/asterisk -cvvv
>  == Parsing '/etc/asterisk/asterisk.conf': Not found (No such file or
> directory)
>  == Parsing '/etc/asterisk/extconfig.conf': Not found (No such file or
> directory)
> Asterisk CVS-HEAD, Copyright (C) 1999 - 2005 Digium.
> Written by Mark Spencer <markster at digium.com>
> =========================================================================
>  == Parsing '/etc/asterisk/logger.conf': Not found (No such file or
> directory)
> Asterisk Event Logger Started /var/log/asterisk/event_log
> Asterisk Dynamic Loader loading preload modules:
>  == Parsing '/etc/asterisk/modules.conf': Found
>  == Manager registered action Ping
>  == Manager registered action Events
>  == Manager registered action Logoff
>  == Manager registered action Hangup
>  == Manager registered action Status
>  == Manager registered action Setvar
>  == Manager registered action Getvar
>  == Manager registered action Redirect
>  == Manager registered action Originate
>  == Manager registered action Command
>  == Manager registered action ExtensionState
>  == Manager registered action AbsoluteTimeout
>  == Manager registered action MailboxStatus
>  == Manager registered action MailboxCount
>  == Manager registered action ListCommands
>  == Parsing '/etc/asterisk/manager.conf': Not found (No such file or
> directory)
>  == Parsing '/etc/asterisk/cdr.conf': Not found (No such file or
> directory)
>  == Parsing '/etc/asterisk/rtp.conf': Not found (No such file or
> directory)
>  == RTP Allocating from port range 5000 -> 31000
> Asterisk PBX Core Initializing
> Registering builtin applications:
> [AbsoluteTimeout]
>  == Registered application 'AbsoluteTimeout'
> [Answer]
>  == Registered application 'Answer'
> [BackGround]
>  == Registered application 'BackGround'
> [Busy]
>  == Registered application 'Busy'
> [Congestion]
>  == Registered application 'Congestion'
> [DigitTimeout]
>  == Registered application 'DigitTimeout'
> [Goto]
>  == Registered application 'Goto'
> [GotoIf]
>  == Registered application 'GotoIf'
> [GotoIfTime]
>  == Registered application 'GotoIfTime'
> [ExecIfTime]
>  == Registered application 'ExecIfTime'
> [Hangup]
>  == Registered application 'Hangup'
> [NoOp]
>  == Registered application 'NoOp'
> [Prefix]
>  == Registered application 'Prefix'
> [Progress]
>  == Registered application 'Progress'
> [ResetCDR]
>  == Registered application 'ResetCDR'
> [ResponseTimeout]
>  == Registered application 'ResponseTimeout'
> [Ringing]
>  == Registered application 'Ringing'
> [SayNumber]
>  == Registered application 'SayNumber'
> [SayDigits]
>  == Registered application 'SayDigits'
> [SayAlpha]
>  == Registered application 'SayAlpha'
> [SayPhonetic]
>  == Registered application 'SayPhonetic'
> [SetAccount]
>  == Registered application 'SetAccount'
> [SetAMAFlags]
>  == Registered application 'SetAMAFlags'
> [SetGlobalVar]
>  == Registered application 'SetGlobalVar'
> [SetLanguage]
>  == Registered application 'SetLanguage'
> [Set]
>  == Registered application 'Set'
> [SetVar]
>  == Registered application 'SetVar'
> [ImportVar]
>  == Registered application 'ImportVar'
> [StripMSD]
>  == Registered application 'StripMSD'
> [Suffix]
>  == Registered application 'Suffix'
> [Wait]
>  == Registered application 'Wait'
> [WaitExten]
>  == Registered application 'WaitExten'
> Asterisk Dynamic Loader Starting:
>  == Parsing '/etc/asterisk/modules.conf': Found
> [chan_modem.so] => (Generic Voice Modem Driver)
>  == Parsing '/etc/asterisk/modem.conf': Found
>  == Loading modem driver chan_modem_aopen.so => (A/Open (Rockwell
> Chipset) ITU-2 VoiceModem Driver)
>  == Registered channel type 'Modem' (Generic Voice ModemChannel Driver)
> [res_musiconhold.so] => (Music On Hold Resource)
>  == Registered application 'MusicOnHold'
>  == Registered application 'WaitMusicOnHold'
>  == Registered application 'SetMusicOnHold'
>  == Registered application 'StartMusicOnHold'
>  == Registered application 'StopMusicOnHold'
>  == Parsing '/etc/asterisk/musiconhold.conf': Not found (No such file
> or directory)
> [res_agi.so] => (Asterisk Gateway Interface (AGI))
>  == Registered application 'DeadAGI'
>  == Registered application 'EAGI'
>  == Registered application 'AGI'
> [res_adsi.so] => (ADSI Resource)
>  == Parsing '/etc/asterisk/adsi.conf': Not found (No such file or
> directory)
> [res_features.so] => (Call Features Resource)
>  == Parsing '/etc/asterisk/features.conf': Not found (No such file or
> directory)
>  == Parsing '/etc/asterisk/parking.conf': Not found (No such file or
> directory)
>    -- Registered extension context 'parkedcalls'
>    -- Added extension '700' priority 1 to parkedcalls
>  == Registered application 'ParkedCall'
>  == Registered application 'Park'
>  == Manager registered action ParkedCalls
> [res_crypto.so] => (Cryptographic Digital Signatures)
>    -- Loaded PUBLIC key 'iaxtel'
>    -- Loaded PUBLIC key 'freeworlddialup'
> [res_indications.so] => (Indications Configuration)
>  == Parsing '/etc/asterisk/indications.conf': Not found (No such file
> or directory)
>  == Registered application 'PlayTones'
>  == Registered application 'StopPlayTones'
> [res_monitor.so] => (Call Monitoring Resource)
>  == Registered application 'Monitor'
>  == Registered application 'StopMonitor'
>  == Registered application 'ChangeMonitor'
>  == Manager registered action Monitor
>  == Manager registered action StopMonitor
>  == Manager registered action ChangeMonitor
> [chan_sip.so] => (Session Initiation Protocol (SIP))
>  == Registered channel type 'SIP' (Session Initiation Protocol (SIP))
>  == Parsing '/etc/asterisk/sip.conf': Not found (No such file or
> directory)
>  == Unregistered channel type 'SIP'
> Segmentation fault
> itanium:/etc/asterisk
> #
>
>
> As you can see it ended with a SegFault.
>
> Any ideas? Did anybody build successfully on Itanium?
>
> Thanks,
>
> // Jonas
>
>
>
> Hi Again,
>
> I removed codec_gsm.so from codecs/Makefile and the build work. Like I
> said, I am not too familiar with Asterisk yet. What implications will
> this have to the functionality?
>
> Thanks,
>
> // Jonas
>
>
>
> Jonas Arndt wrote:
>
>> Thanks Guys,
>>
>> I should have mentioned that I have already tried to remove the flag.
>> What happens then is that I run into other issues.
>>
>> =========================================================================
>>
>> gcc -pipe  -Wall -Wstrict-prototypes -Wmissing-prototypes
>> -Wmissing-declarations
>> -g  -Iinclude -I../include -D_REENTRANT -D_GNU_SOURCE  -O6
>> -DZAPTEL_OPTIMIZAT
>> IONS          -fomit-frame-pointer  -fPIC     -c
>> -DNeedFunctionPrototypes=1 -fun
>> roll-loops -fPIC -O6  -DSASR -DNDEBUG    -DWAV49   -I./inc src/table.c
>> as   -o src/k6opt.o src/k6opt.s
>> src/k6opt.s: Assembler messages:
>> src/k6opt.s:9: Error: unknown pseudo-op: `.value'
>> src/k6opt.s:10: Error: unknown pseudo-op: `.value'
>> src/k6opt.s:11: Error: unknown pseudo-op: `.value'
>> src/k6opt.s:12: Error: unknown pseudo-op: `.value'
>> src/k6opt.s:13: Error: unknown pseudo-op: `.value'
>> src/k6opt.s:14: Error: unknown pseudo-op: `.value'
>> src/k6opt.s:15: Error: unknown pseudo-op: `.value'
>> src/k6opt.s:16: Error: unknown pseudo-op: `.value'
>> src/k6opt.s:17: Error: unknown pseudo-op: `.value'
>> src/k6opt.s:18: Error: unknown pseudo-op: `.value'
>> src/k6opt.s:19: Error: unknown pseudo-op: `.value'
>> src/k6opt.s:20: Error: unknown pseudo-op: `.value'
>> src/k6opt.s:27: Error: Unknown opcode `pushl %ebp'
>> src/k6opt.s:28: Error: bad expression
>> src/k6opt.s:28: Error: Illegal operandseparator `e'
>> src/k6opt.s:29: Error: Unknown opcode `pushl %edi'
>> src/k6opt.s:30: Error: Unknown opcode `pushl %esi'
>> src/k6opt.s:31: Error: Unknown opcode `pushl %ebx'
>> src/k6opt.s:32: Error: Illegal operand separator `('
>> src/k6opt.s:33: Error: Illegal operand separator `('
>> src/k6opt.s:34: Error: bad expression
>> src/k6opt.s:34: Error: Illegal operand separator `e'
>> src/k6opt.s:35: Error: Unknown opcode `emms'
>> src/k6opt.s:36: Error: bad expression
>> src/k6opt.s:36: Error: Illegal operand separator `e'
>> src/k6opt.s:36: Error: Unknown opcode `movd %eax,%mm5'
>> src/k6opt.s:37: Error: Unknown opcode `movq coefs,%mm1'
>> src/k6opt.s:38: Error: Unknown opcode `movq coefs+8,%mm2'
>> src/k6opt.s:39: Error: Unknown opcode `movq coefs+16,%mm3'
>> src/k6opt.s:40: Error: Unknown opcode `xorl %esi,%esi'
>> src/k6opt.s:43: Error: Unknown opcode `movq (%ebx,%esi,2),%mm0'
>> src/k6opt.s:44: Error: Unknown opcode `pmaddwd %mm1,%mm0'
>> src/k6opt.s:46: Error: Unknown opcode `movq 8(%ebx,%esi,2),%mm4'
>> src/k6opt.s:47: Error: Unknown opcode `pmaddwd %mm2,%mm4'
>> src/k6opt.s:48: Error: Unknown opcode `paddd %mm4,%mm0'
>> src/k6opt.s:50: Error: Unknown opcode `movq 16(%ebx,%esi,2),%mm4'
>> src/k6opt.s:51: Error: Unknown opcode `pmaddwd %mm3,%mm4'
>> src/k6opt.s:52: Error: Unknown opcode `paddd %mm4,%mm0'
>> =========================================================================
>>
>>
>> Thanks,
>>
>> // Jonas
>>
>> Kevin P. Fleming wrote:
>>
>>> Jonas Arndt wrote:
>>>
>>>> The problem I am currently facing seem to be in the codecs/gsm
>>>> directory. I am getting the error:
>>>> ===============================================================
>>>> make[2]: Entering directory `/usr/src/asterisk/codecs/gsm'
>>>> if [ ! -d ./lib ] ; then mkdir ./lib ; fi
>>>> gcc -pipe  -Wall -Wstrict-prototypes -Wmissing-prototypes
>>>> -Wmissing-declarations -g  -Iinclude -I../include -D_REENTRANT
>>>> -D_GNU_SOURCE  -O6   -DZAPTEL_OPTIMIZATIONS
>>>> -fomit-frame-pointer  -fPIC     -c -DNeedFunctionPrototypes=1
>>>> -funroll-loops -fPIC -O6 -march=ia64 -DSASR -DNDEBUG    -DWAV49
>>>> -I./inc src/add.c
>>>> cc1: error: invalid option `arch=ia64'
>>>> ===============================================================
>>>
>>>
>>>
>>>
>>> The GSM Makefile is somewhat stupid in this regard; it also fails on
>>> x86-64 machines. I'd suggest just editing codecs/gsm/Makefile to
>>> remove the 'arch' flag, since it really won't make a big difference,
>>> especially if you aren't doing GSM transcoding.
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 254 bytes
Desc: OpenPGP digital signature
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050809/fd7bf3c8/signature.pgp