[Asterisk-Users] TDM400P - All extensions have same CallerID

[Mike Putnam]

I'm starting to see other postings now in other forums (on Digium and AAH) 
about this same issue. It's starting to look possibly like an AMP problem, 
but there is nothing in their forums about it.

If I find anything, I'll be sure to post here.

Mike

----- Original Message ----- 
From: "Mike Putnam" <asterisk at mikeputnam.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Saturday, August 06, 2005 9:08 PM
Subject: Re: [Asterisk-Users] TDM400P - All extensions have same CallerID


> As I stated before, this is my first system. I'm trying to "provide useful 
> input" but I'm not sure what to include. I didn't think you all would want 
> to see config after config after config. I'll gladly supply config files, 
> I'm just not sure which ones are relevent.
>
> The first one requested is the zapata files. Here they are:
>
> zapata.conf
> =============================================
> ;
> ; Zapata telephony interface
> ;
> ; Configuration file
>
> [trunkgroups]
>
> [channels]
>
> language=en
> context=from-pstn
> signalling=fxs_ks
> rxwink=300  ; Atlas seems to use long (250ms) winks
> ;
> ; Whether or not to do distinctive ring detection on FXO lines
> ;
> ;usedistinctiveringdetection=yes
>
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=no
> echotraining=800
> rxgain=4.0
> txgain=0.0
> group=0
> callgroup=1
> pickupgroup=1
> immediate=no
>
> ;faxdetect=both
> faxdetect=incoming
> ;faxdetect=outgoing
> ;faxdetect=no
>
> ;Include AMP configs
> #include zapata_additional.conf
>
> ;Include genzaptelconf configs
> #include zapata-auto.conf
> =====================================
>
> zapata-auto.conf
> =====================================
> ; Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
> ; Zaptel Channels Configurations (zapata.conf)
> ;
> ; This is not intended to be a complete zapata.conf. Rather, it is 
> intended
> ; to be #include-d by /etc/zapata.conf that will include the global 
> settings
> ;
>
> ; Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
> signalling=fxo_ks
> ; Note: this is an extension. Create a ZAP extension in AMP for Channel 1
> context=from-internal
> group=1
> channel => 1
>
> signalling=fxo_ks
> ; Note: this is an extension. Create a ZAP extension in AMP for Channel 2
> context=from-internal
> group=1
> channel => 2
>
> signalling=fxs_ks
> ; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 3
> context=from-pstn
> group=0
> channel => 3
>
> signalling=fxs_ks
> ; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 4
> context=from-pstn
> group=0
> channel => 4
>
> ==========================================
>
> zapata_addional.conf
> ==========================================
> ;;;;;;[201]
> signalling=fxo_ks
> record_out=On-Demand
> record_in=On-Demand
> mailbox=201 at default
> echotraining=800
> echocancelwhenbridge=no
> echocancel=yes
> context=from-internal
> callprogress=no
> callerid="Mike Putnam" <201>
> busydetect=no
> busycount=7
> channel=>1
>
> ;;;;;;[400]
> signalling=fxo_ks
> record_out=On-Demand
> record_in=On-Demand
> mailbox=400 at default
> echotraining=800
> echocancelwhenbridge=no
> echocancel=yes
> context=from-internal
> callprogress=no
> callerid="Putnam Family" <400>
> busydetect=no
> busycount=7
> channel=>2
>
> =================================
>
> As you can see, the channels are set properly.  One thing I did notice is 
> all of the ;;;;;;;;;; in front of the [ext] sections. Does that seem 
> correct? I removed them and it didn't change anything. Other files that 
> you would like to look at?
>
> Also, I'm not sure how to get a trace of the call. Again, trying to get my 
> head wrapped around all of this. The good thing is once I know how to do 
> it, I don't need to ask again.
>
> Thanks,
>
> Mike
>
> ----- Original Message ----- 
> From: "Tzafrir Cohen" <tzafrir at cohens.org.il>
> To: <asterisk-users at lists.digium.com>
> Sent: Saturday, August 06, 2005 9:13 AM
> Subject: Re: [Asterisk-Users] TDM400P - All extensions have same CallerID
>
>
>> On Sat, Aug 06, 2005 at 09:02:30AM -0600, Mike Putnam wrote:
>>
>>> Any and all suggestions are greatly appreciated.
>>
>> Provide some useful input:
>>
>> * the relevant config files
>>
>> * a CLI trace of the course of a problematic call, after you have set
>>  verbosity to a resonable value. E.g: 'set verbose 3'.
>>
>> Isn't this "in the FAQ"? (what exactly is "The FAQ"?)
>>
>> -- 
>> Tzafrir Cohen         | tzafrir at jbr.cohens.org.il | VIM is
>> http://tzafrir.org.il |                           | a Mutt's
>> tzafrir at cohens.org.il |                           |  best
>> ICQ# 16849755         |                           | friend
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>>
>>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
>