[Asterisk-Users] TDM400P - All extensions have same CallerID

[Mike Putnam]

As I stated before, this is my first system. I'm trying to "provide useful 
input" but I'm not sure what to include. I didn't think you all would want 
to see config after config after config. I'll gladly supply config files, 
I'm just not sure which ones are relevent.

The first one requested is the zapata files. Here they are:

zapata.conf
=============================================
;
; Zapata telephony interface
;
; Configuration file

[trunkgroups]

[channels]

language=en
context=from-pstn
signalling=fxs_ks
rxwink=300  ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes

usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=4.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no

;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no

;Include AMP configs
#include zapata_additional.conf

;Include genzaptelconf configs
#include zapata-auto.conf
=====================================

zapata-auto.conf
=====================================
; Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;

; Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
signalling=fxo_ks
; Note: this is an extension. Create a ZAP extension in AMP for Channel 1
context=from-internal
group=1
channel => 1

signalling=fxo_ks
; Note: this is an extension. Create a ZAP extension in AMP for Channel 2
context=from-internal
group=1
channel => 2

signalling=fxs_ks
; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 3
context=from-pstn
group=0
channel => 3

signalling=fxs_ks
; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 4
context=from-pstn
group=0
channel => 4

==========================================

zapata_addional.conf
==========================================
;;;;;;[201]
signalling=fxo_ks
record_out=On-Demand
record_in=On-Demand
mailbox=201 at default
echotraining=800
echocancelwhenbridge=no
echocancel=yes
context=from-internal
callprogress=no
callerid="Mike Putnam" <201>
busydetect=no
busycount=7
channel=>1

;;;;;;[400]
signalling=fxo_ks
record_out=On-Demand
record_in=On-Demand
mailbox=400 at default
echotraining=800
echocancelwhenbridge=no
echocancel=yes
context=from-internal
callprogress=no
callerid="Putnam Family" <400>
busydetect=no
busycount=7
channel=>2

=================================

As you can see, the channels are set properly.  One thing I did notice is 
all of the ;;;;;;;;;; in front of the [ext] sections. Does that seem 
correct? I removed them and it didn't change anything. Other files that you 
would like to look at?

Also, I'm not sure how to get a trace of the call. Again, trying to get my 
head wrapped around all of this. The good thing is once I know how to do it, 
I don't need to ask again.

Thanks,

Mike

----- Original Message ----- 
From: "Tzafrir Cohen" <tzafrir at cohens.org.il>
To: <asterisk-users at lists.digium.com>
Sent: Saturday, August 06, 2005 9:13 AM
Subject: Re: [Asterisk-Users] TDM400P - All extensions have same CallerID


> On Sat, Aug 06, 2005 at 09:02:30AM -0600, Mike Putnam wrote:
>
>> Any and all suggestions are greatly appreciated.
>
> Provide some useful input:
>
> * the relevant config files
>
> * a CLI trace of the course of a problematic call, after you have set
>  verbosity to a resonable value. E.g: 'set verbose 3'.
>
> Isn't this "in the FAQ"? (what exactly is "The FAQ"?)
>
> -- 
> Tzafrir Cohen         | tzafrir at jbr.cohens.org.il | VIM is
> http://tzafrir.org.il |                           | a Mutt's
> tzafrir at cohens.org.il |                           |  best
> ICQ# 16849755         |                           | friend
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
>