[Asterisk-Users] Need Help Troubleshooting Broadvoice Connection

[Tim P]

Ok I can register with BV fine (as far as I can tell from asterisk -
see below).  I am able to make outgoing calls but all incoming calls
get a fast busy.

I have opened and forwarded the following ports to my pbx:
5060-5063 UDP + TCP
69 UDP (BV claims they need this)
10000-20000 UDP

I tried switching proxies as well, tried both LAX and CHI with the
same problem.  Called BV they said they can conenct andd call it with
a softphone so it must be a configuration issue.

Here are some outputs that might be helpful:

Asterisk -r
sip show registry

asterisk1*CLI> 
Host                            Username       Refresh State               
sip.broadvoice.com:5060         2068660133 at s        23 Registered          

asterisk1*CLI> sip show peers

asterisk1*CLI> 
Name/username    Host            Dyn Nat ACL Mask             Port    
Status
bv/2068660133    147.135.12.128       N      255.255.255.255  5060    
Unmonitored
1111/1111        (Unspecified)    D          255.255.255.255  0       
Unmonitored
1005/1005        (Unspecified)    D          255.255.255.255  0       
Unmonitored
1004/1004        (Unspecified)    D          255.255.255.255  0       
Unmonitored
1003/1003        (Unspecified)    D          255.255.255.255  0       
Unmonitored
1002/1002        (Unspecified)    D          255.255.255.255  0       
Unmonitored

asterisk1*CLI> sip show peer bv

asterisk1*CLI> 


  * Name       : bv
  Secret       : <Set>
  MD5Secret    : <Not set>
  Context      : from-pstn
  Language     : 
  FromUser     : 2068660133
  FromDomain   : sip.broadvoice.com
  Callgroup    :  (0)
  Pickupgroup  :  (0)
  Mailbox      : 
  LastMsgsSent : -1
  Dynamic      : No
  Expire       : -1 seconds
  Expiry       : 900
  Insecure     : Very
  Nat          : Always
  ACL          : No
  CanReinvite  : No
  PromiscRedir : No
  DTMFmode     : inband 
  LastMsg      : 0
  ToHost       : sip.broadvoice.com
  Addr->IP     : 147.135.12.128 Port 5060
  Defaddr->IP  : 0.0.0.0 Port 0
  Username     : 2068660133
  Codecs       : 0xc (ulaw|alaw)
  Codec Order  : (ulaw|alaw)
  Status       : UNKNOWN
  Useragent    : 
  Full Contact : 

(not sure about that Status = UNKNOWN, is that a problem?)

Get full output on outgoing calls and they connect sucessfully
Get zero output on incoming calls, pbx never seem to get them

Here is my sip.conf
register=2068660133 at sip.broadvoice.com:mypass:2068660133 at sip.broadvoice.com

[sip.broadvoice.com]
username=2068660133
user=2068660133
type=user
secret=mypass
nat=yes
insecure=very
host=sip.broadvoice.com
fromdomain=sip.broadvoice.com
dtmfmode=inband
dtmf=inband
context=from-pstn
authname=2068660133

Any ideas?