[Asterisk-Users] ignorepat doesn't work

[Jerry]

The digitmap is in your telephone. Used to terminate dialing and send 
the dialed string to *.

On Apr 23, 2005, at 11:56 PM, Jaime Blanco wrote:

> Jerry,
>
> when you say digitmap, you mean in my extensions.conf file?
>
> Thanks.
> Jaime
>
>> From: Jerry <jjones at quiddesign.com>
>> Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion 
>> <asterisk-users at lists.digium.com>
>> To: Asterisk Users Mailing List - Non-Commercial Discussion 
>> <asterisk-users at lists.digium.com>
>> Subject: Re: [Asterisk-Users] ignorepat doesn't work
>> Date: Sat, 23 Apr 2005 19:44:20 -0500
>>
>> Try adding a comma to your digitmap where you wish the dialtone to 
>> come back on. Works on a Polycom.
>>
>>
>> On Apr 23, 2005, at 7:12 PM, Eric Wieling aka ManxPower wrote:
>>
>>> Grandstream does not support a dialplan.  It is supposed to support 
>>> Early Dial, but didn't work.  I've been told that recent firmware 
>>> fixes the early dial bug.  I doubt that Early Dial is the solution. 
>>> The solution is to buy a good IP Phone.  Polycom and SIPura both 
>>> support "continue dialtone after digit".  Cisco ATAs do not.  I 
>>> don't know if the Cisco IP phones do or not.
>>>
>>> Alexander Lopez wrote:
>>>>  ignorepat is for Zapata devices. Sip devices sned the number to the
>>>> swith AFTER the SIP device feels it has dialed it. I am not a pro 
>>>> on the
>>>> GS phones, (never played with them) but I would cheak the 
>>>> documentation
>>>> on setting up a 'dialplan'. I hope this sets you in the right 
>>>> direction.
>>>> Alex
>>>> -----Original Message-----
>>>> From: asterisk-users-bounces at lists.digium.com
>>>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jaime
>>>> Blanco
>>>> Sent: Saturday, April 23, 2005 4:38 PM
>>>> To: asterisk-users at lists.digium.com
>>>> Subject: Re: [Asterisk-Users] ignorepat doesn't work Hi,
>>>> I was trying to get the solution for the issue with getting dial 
>>>> tone
>>>> after dialing 9, in sip phone, but I couldn't get anything.  I am 
>>>> using
>>>> a Grandstream Budgetone 100.  I include ignorepat in the handset
>>>> context, but nothing.
>>>> Any guideline or help?
>>>> Thanks.
>>>> Jaime
>>>> On Wednesday, July 9, 2003, at 10:07 PM, The Traveller wrote:
>>>> I had the same problem here and discovered that "ignorepat" only 
>>>> works
>>>> if it's placed in the actual incoming context of your channels and 
>>>> not
>>>> if it's included from another context.
>>>> thinking about it, this makes sense because there may be multiple
>>>> contexts with extensions starting with the same ignorepat digit.
>>>>    Not sure if this is a bug or a feature.
>>>> probably intentional.
>>>> So, try placing the "ignorepat" in your handset-contexts instead.
>>>> Well, it works now on the Zap channels but not on the SIP phones.
>>>> Does anyone know how to fix this for SIP phones? but it's not that
>>>> important anyway.
>>>
>>>
>>> --
>>> Always do right. This will gratify some people and astonish the rest.
>>> Mark Twain
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>