[Asterisk-Users] ignorepat doesn't work

[Jaime Blanco]

Jerry,

when you say digitmap, you mean in my extensions.conf file?

Thanks.
Jaime

>From: Jerry <jjones at quiddesign.com>
>Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion 
><asterisk-users at lists.digium.com>
>To: Asterisk Users Mailing List - Non-Commercial Discussion 
><asterisk-users at lists.digium.com>
>Subject: Re: [Asterisk-Users] ignorepat doesn't work
>Date: Sat, 23 Apr 2005 19:44:20 -0500
>
>Try adding a comma to your digitmap where you wish the dialtone to come 
>back on. Works on a Polycom.
>
>
>On Apr 23, 2005, at 7:12 PM, Eric Wieling aka ManxPower wrote:
>
>>Grandstream does not support a dialplan.  It is supposed to support Early 
>>Dial, but didn't work.  I've been told that recent firmware fixes the 
>>early dial bug.  I doubt that Early Dial is the solution. The solution is 
>>to buy a good IP Phone.  Polycom and SIPura both support "continue 
>>dialtone after digit".  Cisco ATAs do not.  I don't know if the Cisco IP 
>>phones do or not.
>>
>>Alexander Lopez wrote:
>>>  ignorepat is for Zapata devices. Sip devices sned the number to the
>>>swith AFTER the SIP device feels it has dialed it. I am not a pro on the
>>>GS phones, (never played with them) but I would cheak the documentation
>>>on setting up a 'dialplan'. I hope this sets you in the right direction.
>>>Alex
>>>-----Original Message-----
>>>From: asterisk-users-bounces at lists.digium.com
>>>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jaime
>>>Blanco
>>>Sent: Saturday, April 23, 2005 4:38 PM
>>>To: asterisk-users at lists.digium.com
>>>Subject: Re: [Asterisk-Users] ignorepat doesn't work Hi,
>>>I was trying to get the solution for the issue with getting dial tone
>>>after dialing 9, in sip phone, but I couldn't get anything.  I am using
>>>a Grandstream Budgetone 100.  I include ignorepat in the handset
>>>context, but nothing.
>>>Any guideline or help?
>>>Thanks.
>>>Jaime
>>>On Wednesday, July 9, 2003, at 10:07 PM, The Traveller wrote:
>>>I had the same problem here and discovered that "ignorepat" only works
>>>if it's placed in the actual incoming context of your channels and not
>>>if it's included from another context.
>>>thinking about it, this makes sense because there may be multiple
>>>contexts with extensions starting with the same ignorepat digit.
>>>    Not sure if this is a bug or a feature.
>>>probably intentional.
>>>So, try placing the "ignorepat" in your handset-contexts instead.
>>>Well, it works now on the Zap channels but not on the SIP phones.
>>>Does anyone know how to fix this for SIP phones? but it's not that
>>>important anyway.
>>
>>
>>--
>>Always do right. This will gratify some people and astonish the rest.
>>Mark Twain
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users