[Asterisk-Users] TE11OP -> Mitel 200Sx??
Scott Wolfe
scottwolfe at orbus.net
Sun Apr 24 09:09:22 MST 2005
Thanks Henry,
-Scott
----- Original Message -----
From: "Henry Devito" <hdevito at mchsi.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Saturday, April 23, 2005 11:05 PM
Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??
>I am trying to locate the manual for that level software. If it's not here
>at home it is at my office and I will look everything up in the morning.
> ----- Original Message -----
> From: "Scott Wolfe" <scottwolfe at orbus.net>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <asterisk-users at lists.digium.com>; <dwalker at jackson-tube.com>
> Sent: Saturday, April 23, 2005 9:00 PM
> Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??
>
>
>> The Switch is since 1995 and I get a SX-200 Digital G1005 ENH 672P /
>> F25.0 09-FEB1994 when I look up the software on the switch board so if I
>> am reading what your telling me then I have to do D4/AMI. So does my
>> zaptel look correct? Maybe my cableing is off.
>> Thanks,
>> -Scott
>> ----- Original Message -----
>> From: "Henry Devito" <hdevito at mchsi.com>
>> To: <dwalker at jackson-tube.com>; "Asterisk Users Mailing List -
>> Non-Commercial Discussion" <asterisk-users at lists.digium.com>
>> Sent: Friday, April 22, 2005 8:34 PM
>> Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??
>>
>>
>>> Of course there are exceptions to the rules. I see now on a couple
>>> software releases where they do allow PRI with D4/AMI and PRI with
>>> esf/b8zs. It's been a year or so since I messed with trunking on a 200,
>>> I've mostly been installing and maintaining the SX2000's and 3300's.
>>>
>>> Henry
>>>
>>>
>>>
>>> ----- Original Message -----
>>> From: "Dennis Walker" <dwalker at jackson-tube.com>
>>> To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
>>> <asterisk-users at lists.digium.com>
>>> Sent: Friday, April 22, 2005 9:13 PM
>>> Subject: RE: [Asterisk-Users] TE11OP -> Mitel 200Sx??
>>>
>>>
>>>>I have done the same thing with an sx200 and a pri circuit
>>>>
>>>> My sx200 can only do ami d4 and e&m channels
>>>>
>>>> Here's parts of my config that takes the pri and converts it to e&m
>>>> with
>>>> ANI & DNIS
>>>>
>>>> zaptel.conf
>>>>
>>>> # t1 connected to the PRI circuit
>>>> span=1,1,0,exf,b8zs
>>>>
>>>> # t1 connected to SX200
>>>> # the t1 card on my sx200 did d4 ami and I supplied ANI and DNIS
>>>> through
>>>> the dial plan
>>>>
>>>> span=2,0,0,d4,ami
>>>>
>>>> bchan=1-23
>>>> dchan=24
>>>> e&m=25-47
>>>> ---------------------------------------------
>>>> zapata.conf
>>>>
>>>> [channels]
>>>>
>>>> echocancel=yes
>>>> echocancelwhenbridged=yes
>>>> echotraining=no
>>>> rxgain=0.0
>>>> txgain=0.0
>>>> useincomingcalleridonzaptransfer=yes
>>>> restrictcid=no
>>>> context=default
>>>> usecallingpres=yes
>>>> usercallerid=yes
>>>> hidecallerid=no
>>>> callerid="Company Name"<8005551212>
>>>> signalling=pri_cpe
>>>> switchtype=dms100
>>>> group=1
>>>> channel => 1-23
>>>>
>>>> group=2
>>>> signalling=em_w
>>>> emdigitwait=500
>>>> channel => 24-47
>>>>
>>>> # I needed the emdigitwait=500 to wait long enough for the SX200 to
>>>> dial
>>>> out it's digits
>>>>
>>>>
>>>> --------------------------------------------------
>>>> extensions.conf
>>>>
>>>> # our PRI circiut gave us the last 4 digits of the dialed number and
>>>> this
>>>> is how I passed
>>>> # *ANI*DNIS* to the SX200 for it to decode
>>>>
>>>> # the first group were individual numbers that mapped to faxes and
>>>> modems
>>>>
>>>> exten => 1234,1,Dial(Zap/g2/*${CALLERIDNUM}*${EXTEN}*,,r)
>>>> exten => 5555,1,Dial(Zap/g2/*${CALLERIDNUM}*${EXTEN}*,,r)
>>>> exten => 3333,1,Dial(Zap/g2/*${CALLERIDNUM}*${EXTEN}*,,r)
>>>>
>>>> # this set mapped our did 5000 - 5199 to the SX200
>>>>
>>>> exten => _5[0-1]XX,1,Dial(Zap/g2/*${CALLERIDNUM}*${EXTEN}*,,r)
>>>>
>>>> The reset of the dial plan took what ever I set up in the sx200 ARS to
>>>> dial
>>>> out and
>>>> sent out put Zap/G1
>>>>
>>>>
>>>> Hope this helps
>>>>
>>>>
>>>>
>>>>
>>>> ----------
>>>> From: Henry Devito[SMTP:hdevito at mchsi.com]
>>>> Reply To: Asterisk Users Mailing List - Non-Commercial Discussion
>>>> Sent: Friday, April 22, 2005 8:56 PM
>>>> To: Scott Wolfe; Asterisk Users Mailing List - Non-Commercial
>>>> Discussion
>>>> Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??
>>>>
>>>> <<File: ATT00262.html>><<File: ATT00263.txt>>
>>>> I was wrong. I just looked in my Mitel I&M's. What level software are
>>>> you
>>>> on in the SX200? Up until a certain level 200's could only do D4/AMI
>>>> T1's,
>>>> they could not do PRI's. If it is a newer switch within the past 3
>>>> years
>>>> or an older switch with later software than you can do PRI, but the
>>>> signaling and framing must be ESF/B8ZS.
>>>>
>>>> Henry
>>>> ----- Original Message -----
>>>> From: Scott Wolfe
>>>> To: mike at shelcomm.com ; Asterisk Users Mailing List - Non-Commercial
>>>> Discussion
>>>> Sent: Friday, April 22, 2005 7:04 PM
>>>> Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??
>>>>
>>>>
>>>>
>>>>
>>>> Thanks,
>>>> This is what I have now, but my Mitel PBX and Asterisk Box are
>>>> unable
>>>> to communicate via the T1 connection. Asterisk loads ok but I get error
>>>> lights (blinking orange) on my TE110P and on my Mitel T1 card. Hummmm
>>>>
>>>>
>>>> -Scott
>>>>
>>>> /etc/zaptel.conf
>>>> loadzone = us
>>>> defaultzone=us
>>>> span=1,0,0,d4,ami
>>>> bchan=1-23
>>>> dchan=24
>>>>
>>>> /etc/asterisk/zapata.conf
>>>> [trunkgroups]
>>>>
>>>> [channels]
>>>> context=default
>>>> switchtype=dms100
>>>> rxwink=300
>>>> usecallerid=no
>>>> hidecallerid=no
>>>> callwaiting=no
>>>> usecallingpres=yes
>>>> callwaitingcallerid=no
>>>> threewaycalling=yes
>>>> transfer=yes
>>>> canpark=yes
>>>> cancallforward=yes
>>>> callreturn=yes
>>>> echocancel=yes
>>>> echocancelwhenbridged=yes
>>>> rxgain=0.0 ;into the pstn twords the telco
>>>> txgain=0.0
>>>> callgroup=1
>>>> pickupgroup=1
>>>> immediate=yes
>>>>
>>>> signalling=pri_cpe
>>>> group=1
>>>> context=default
>>>> emdigitwait=500
>>>> channel => 1-23 ; Set this to 1-15,17-31 for E1
>>>>
>>>>
>>>>
>>>>
>>>> ----- Original Message -----
>>>> From: Michael D Schelin
>>>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>>> Sent: Friday, April 22, 2005 4:48 PM
>>>> Subject: Re: [Asterisk-Users] TE11OP -> Mitel 200Sx??
>>>>
>>>>
>>>> Hello Henry
>>>> e&m=1-23 should be bchan=1-23
>>>> you have it set for analog
>>>> also
>>>> signaling=pri_cpe
>>>>
>>>>
>>>> Henry Devito wrote:
>>>>
>>>> Don't you need one of these directives so the PRI knows which is
>>>> master and which is slave?
>>>>
>>>> a.. pri_cpe: PRI signaling, CPE side
>>>> a.. pri_net: PRI signaling, Network side
>>>>
>>>> Henry
>>>> ----- Original Message -----
>>>> From: Scott Wolfe
>>>> To: Asterisk-Users at lists.digium.com
>>>> Sent: Friday, April 22, 2005 11:01 AM
>>>> Subject: [Asterisk-Users] TE11OP -> Mitel 200Sx??
>>>>
>>>>
>>>> Hello all. I just received a TE110P and am trying to hook it to
>>>> my
>>>> Mitel 200SX has anyone successfully done this? My configuration is as
>>>> follows.
>>>>
>>>>
>>>> Asterisk -> TE110P ->Kentrox (csu/dsu) -> Mitel T1 Card.
>>>>
>>>>
>>>> All I get is a blinking yellow on my TE110P card and an alarm on
>>>> my
>>>> Mitel. T1 card.
>>>>
>>>>
>>>> Any advice would be great.
>>>>
>>>>
>>>> Zaptel.conf
>>>>
>>>> span=1,0,1,d4,ami
>>>>
>>>> e&m=1-23
>>>>
>>>> dchan=24
>>>>
>>>>
>>>> Zapata.conf
>>>>
>>>> signalling=em_w
>>>>
>>>> switchtype=dms100
>>>>
>>>> echocancel=yes
>>>>
>>>> echocancelwhenbridged=yes
>>>>
>>>> echotraining=400
>>>>
>>>> callerid=asreceived
>>>>
>>>> group=1
>>>>
>>>> context=default
>>>>
>>>> channel => 1-23
>>>>
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>> _______________________________________________
>>>> Asterisk-Users mailing list
>>>> Asterisk-Users at lists.digium.com
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>> --------------------------------------------------------------------------
>>>> _______________________________________________
>>>> Asterisk-Users mailing list
>>>> Asterisk-Users at lists.digium.com
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>> ----
>>>>
>>>>
>>>> _______________________________________________
>>>> Asterisk-Users mailing list
>>>> Asterisk-Users at lists.digium.com
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>> ------
>>>>
>>>>
>>>> _______________________________________________
>>>> Asterisk-Users mailing list
>>>> Asterisk-Users at lists.digium.com
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>> _______________________________________________
>>>> Asterisk-Users mailing list
>>>> Asterisk-Users at lists.digium.com
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list