[Asterisk-Users] Unable to specify channel 1: No such device

[Gregorio Toscano]

Hi, I did not find any useful information to configure a Wildcard
TDM400P with a FXO card. I've tried everithing, I tried configure it
using the cvs and the information from digium page, I tried to
configure it using
debian packages, I tried to configure with kernels 2.4.30 and 2.6.11, I even
switched the mother board (I tried 3 motherboards).

I tanks in advace any help you could give me.

Best Regards,
Gregorio Toscano
gtoscano at gmail.com

The erros are:

Apr 15 16:08:37 WARNING[1468]: chan_zap.c:850 zt_open: Unable to
specify channel 1: No such device
Apr 15 16:08:37 ERROR[1468]: chan_zap.c:6458 mkintf: Unable to open
channel 1: No such device
here = 0, tmp->channel = 1, channel = 1
Apr 15 16:08:37 ERROR[1468]: chan_zap.c:9558 setup_zap: Unable to
register channel '1'

My configuration files are:

lsmod
Module                  Size  Used by    Not tainted
wctdm                  97248   0  (unused)
zaptel                214784   0  [wctdm]

dmesg (final):
Module 0: Not installed
Module 1: Not installed
Module 2: Not installed
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)

najay:/etc# cat zaptel.conf
loadzone = us
defaultzone = us
fxs_ks=1

najay:/etc/asterisk# cat zapata.conf
[channels]
signalling=fxo_ks
echocancel=yes ; You can set this to 32, 64, or 128, tweak to your needs.
echocancelwhenbridged=yes
echotraining=400 ; Asterisk trains to the beginning of the call,
number is in milliseconds
callerid=asreceived
group=1
context=default ; Points to the default context of your extensions.conf
channel = 1 ; Again X is the number of FXO modules you have

najay:/etc/asterisk# cat voicemail.conf
[general]

format=wav

[default]
8500 => 1234,Gummer,gtoscano at gmail.com

[root at fred asterisk]#cat extensions.conf

[default]
exten => 2999,1,VoicemailMain(${CALLERIDNUM})
exten => 0.,1,Dial(Zap/g1/${EXTEN}/20,t)
exten => s,1,Wait(1)
exten => s,2,Dial,Zap/g1 ; Dials the first available channel in group 1
exten => s,3,Voicemail,u9000
exten => s,4,Hangup

najay:/proc# cat interrupts
          CPU0
 0:     362024          XT-PIC  timer
 1:       6987          XT-PIC  keyboard
 2:          0          XT-PIC  cascade
10:    2792513          XT-PIC  wctdm
11:      10280          XT-PIC  via82cxxx, eth0
12:       3653          XT-PIC  PS/2 Mouse
14:      16860          XT-PIC  ide0
NMI:          0
ERR:          0