[Asterisk-Users] rookie getting started question
Randy Paries
randy.paries at unitnet.com
Mon Apr 4 18:18:56 MST 2005
Hello,
Thanks for the info
I have tried the and setup the conf files as below::
Thanks for any insight
Randy
----------------------------------------------------------------------------
------
#/sbin/ztcfg -vv
Zaptel Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
2 channels configured.
ZT_CHANCONFIG failed on channel 2: Invalid argument (22)
Did you forget that FXS interfaces are configured with FXO signalling
and that FXO interfaces use FXS signalling?
----------------------------------------------------------------------------
------
#lspci
00:00.0 Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev 03)
00:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
00:04.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
interface
00:05.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
interface
00:14.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
00:14.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:14.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:14.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP
1X/2X (rev 5c)
----------------------------------------------------------------------------
------
#cat /proc/interrupts
CPU0
0: 184892 XT-PIC timer
1: 5 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
11: 3585589 XT-PIC wcfxo, ztdummy, usb-uhci, eth0
14: 5360 XT-PIC ide0
15: 0 XT-PIC ide1
NMI: 0
ERR: 0
----------------------------------------------------------------------------
------
#cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev 3).
Master Capable. Latency=64.
Prefetchable 32 bit memory at 0x50000000 [0x53ffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev 3).
Master Capable. Latency=64. Min Gnt=12.
Bus 0, device 3, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) (rev
0).
IRQ 11.
I/O at 0x2040 [0x205f].
Bus 0, device 4, function 0:
Communication controller: Tiger Jet Network Inc. Intel 537 (rev 0).
IRQ 11.
Master Capable. Latency=66. Min Gnt=1.Max Lat=128.
I/O at 0x2800 [0x28ff].
Non-prefetchable 32 bit memory at 0x41200000 [0x41200fff].
Bus 0, device 5, function 0:
Communication controller: Tiger Jet Network Inc. Intel 537 (#2) (rev 0).
IRQ 11.
Master Capable. Latency=66. Min Gnt=1.Max Lat=128.
I/O at 0x2400 [0x24ff].
Non-prefetchable 32 bit memory at 0x41100000 [0x41100fff].
Bus 0, device 20, function 0:
ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 1).
Bus 0, device 20, function 1:
IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 1).
Master Capable. Latency=64.
I/O at 0x2020 [0x202f].
Bus 0, device 20, function 2:
USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 1).
IRQ 11.
Master Capable. Latency=64.
I/O at 0x2000 [0x201f].
Bus 0, device 20, function 3:
Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 1).
IRQ 9.
Bus 1, device 0, function 0:
VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X
(rev 92).
IRQ 11.
Master Capable. Latency=66. Min Gnt=8.
Non-prefetchable 32 bit memory at 0x40000000 [0x40ffffff].
I/O at 0x1000 [0x10ff].
Non-prefetchable 32 bit memory at 0x41000000 [0x41000fff].
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of J P Edmund
Sent: Monday, April 04, 2005 6:10 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] rookie getting started question
Being a newbie, I may be wrong but I think you need to do the following (I
have a similar setup). This is what I have. (from aah)
# Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit #
Zaptel Configuration File # # This file is parsed by the Zaptel
Configurator, ztcfg #
# It must be in the module loading order
# Span 1: WCFXO/0 "Generic Clone Board 1"
fxsks=1
# Span 2: WCFXO/1 "Generic Clone Board 2"
fxsks=2
# Span 3: ZTDUMMY/1 "ZTDUMMY/1 1"
# Global data
loadzone = us
defaultzone = us
You should also check you zapata.conf
; Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit ;
Zaptel Channels Configurations (zapata.conf) ; ; This is not intended to be
a complete zapata.conf. Rather, it is intended ; to be #include-d by
/etc/zapata.conf that will include the global settings ;
; Span 1: WCFXO/0 "Generic Clone Board 1"
signalling=fxs_ks
callerid="" <0>
mailbox=
channel => 1
; Span 2: WCFXO/1 "Generic Clone Board 2"
signalling=fxs_ks
callerid="" <0>
mailbox=
channel => 2
; Span 3: ZTDUMMY/1 "ZTDUMMY/1 1"
Hope that helps...
take a look at asterisk at home
J.P. Edmund
"If you think it's not a game, you've already lost"
On Apr 4, 2005, at 6:03 PM, Randy Paries wrote:
> Thanks for the info
>
> OK my first questions....
>
> I have edited my zaptel.conf
> ============================
> fxsks=1-2
> loadzone = us
> defaultzone=us
>
> I have two X100P cards installed
>
> When I run /sbin/ztcfg
> ZT_CHANCONFIG failed on channel 2: Invalid argument (22) Did you
> forget that FXS interfaces are configured with FXO signalling and that
> FXO interfaces use FXS signalling?
>
> If I set fxsks=1 it works ok.
>
> Thanks
> Randy
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sean
> Kennedy
> Sent: Monday, April 04, 2005 2:50 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] rookie getting started question
>
> Randy Paries wrote:
>
>> Hello,
>>
>> I just download and installed the .8 ISO
>>
>> i have installed two Digium Wildcard X100P Cards( I have two outside
>> normal analog lines)
>>
>> Is there a simple of howto to get these working ?
>>
>> I download the handbook, but wow there are many options.
>>
>> I guess, the one question I first should ask, is ?? Should the user
>> be familiar with telephony apps and terms before attempting to use
>> this app. I am a programmer that owns a small business, so all the
>> IT/phone stuff is done by me and that is not my expertise.
>>
>> Thanks
>> Randy
>>
>>
> The * admin should have some working knowledge, I would suppose. I
> didn't.
> I had to bootstrap learn, as it were, just like you are. It's not so
> bad, once you get the hang of it ( actually, it's quite easy ).
>
> If you have specific questions regarding installation, Digium offers
> free tech support for the initial installation. Or you can ask your
> specific questions here and we can try to help you.
>
> Sean
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list