[Asterisk-Users] rookie getting started question

[J P Edmund]

Being a newbie, I may be wrong but I think you need to do the following 
(I have a similar setup). This is what I have. (from aah)

# Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#

# It must be in the module loading order


# Span 1: WCFXO/0 "Generic Clone Board 1"
fxsks=1

# Span 2: WCFXO/1 "Generic Clone Board 2"
fxsks=2

# Span 3: ZTDUMMY/1 "ZTDUMMY/1 1"

# Global data

loadzone	= us
defaultzone	= us

You should also check you zapata.conf

; Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is 
intended
; to be #include-d by /etc/zapata.conf that will include the global 
settings
;

; Span 1: WCFXO/0 "Generic Clone Board 1"
signalling=fxs_ks
callerid="" <0>
mailbox=
channel => 1


; Span 2: WCFXO/1 "Generic Clone Board 2"
signalling=fxs_ks
callerid="" <0>
mailbox=
channel => 2


; Span 3: ZTDUMMY/1 "ZTDUMMY/1 1"

Hope that helps...
take a look at asterisk at home



J.P. Edmund

"If you think it's not a game, you've already lost"

On Apr 4, 2005, at 6:03 PM, Randy Paries wrote:

> Thanks for the info
>
> OK my first questions....
>
> I have edited my zaptel.conf
> ============================
> fxsks=1-2
> loadzone = us
> defaultzone=us
>
> I have two X100P cards installed
>
> When I run  /sbin/ztcfg
> ZT_CHANCONFIG failed on channel 2: Invalid argument (22)
> Did you forget that FXS interfaces are configured with FXO signalling
> and that FXO interfaces use FXS signalling?
>
> If I set fxsks=1 it works ok.
>
> Thanks
> Randy
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sean 
> Kennedy
> Sent: Monday, April 04, 2005 2:50 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] rookie getting started question
>
> Randy Paries wrote:
>
>> Hello,
>>
>> I just download and installed the .8 ISO
>>
>> i have installed two Digium Wildcard X100P Cards( I have two outside
>> normal analog lines)
>>
>> Is there a simple of howto to get these working ?
>>
>> I download the handbook, but wow there are many options.
>>
>> I guess, the one question I first should ask, is ?? Should the user be
>> familiar with telephony apps and terms before attempting to use this
>> app. I am a programmer that owns a small business, so all the IT/phone
>> stuff is done by me and that is not my expertise.
>>
>> Thanks
>> Randy
>>
>>
> The * admin should have some working knowledge, I would suppose.  I 
> didn't.
> I had to bootstrap learn, as it were, just like you are.  It's not so 
> bad,
> once you get the hang of it ( actually, it's quite easy ).
>
> If you have specific questions regarding installation, Digium offers 
> free
> tech support for the initial installation.  Or you can ask your 
> specific
> questions here and we can try to help you.
>
> Sean
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>