[Asterisk-Users] Timing Problem

[Steven Critchfield]

On Thu, 2004-09-30 at 18:58, Carl F. Hall wrote:
> I tried the reboot but the machine is not near me so I can't bring it down
> fully and wait to bring it up.
> 
> I was told by the telco to use "dtmf wink".  I have the timing in
> zapata.conf set to rxwink=300.  Do I need to change something to handle dtmf
> wink?

wink is like flash, it is a hook cycle and therefore not anything to do
with your line slippage,

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steven
> Critchfield
> Sent: Thursday, September 30, 2004 7:41 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] Timing Problem
> 
> On Thu, 2004-09-30 at 18:38, Carl F. Hall wrote:
> > I changed my span line per your suggestion and am still getting the
> > following error when I call the system:
> > 
> > *CLI>     -- Starting simple switch on 'Zap/1-1'
> >     -- Starting simple switch on 'Zap/2-1'
> >     -- Hungup 'Zap/1-1'
> > Sep 30 19:40:09 WARNING[1103756208]: chan_zap.c:1312 zt_set_hook: zt hook
> > failed: Device or resource busy
> >     -- Starting simple switch on 'Zap/1-1'
> >     -- Hungup 'Zap/1-1'
> >     -- Hungup 'Zap/2-1'
> > Sep 30 19:40:14 WARNING[1103756208]: chan_zap.c:1312 zt_set_hook: zt hook
> > failed: Device or resource busy
> >     -- Starting simple switch on 'Zap/2-1'
> >     -- Hungup 'Zap/2-1'
> > 
> > Any thoughts?
> 
> Did you reboot? I have noticed timing can be a pain if you don't get the
> card fully reinitialised. Maybe even a power down / power up after 30
> seconds down time.
-- 
Steven Critchfield <critch at basesys.com>