[Asterisk-Users] BudgeTone 100 & Call Transfer

Marco Nicolayevsky marco at misterart.com
Tue Sep 28 07:02:28 MST 2004


Steve,

 

I don't see an option like what you're mentioning. However, there is an
entire section called "advanced features" with 50+ settings. My current
firmware is: 

Program--1.0.4.71    Bootloader--1.0.0.17    HTML--1.0.0.32    VOC--1.0.0.6

 

Thanks,

 

Marco

 

 

------------------------------------------

Marco Nicolayevsky

Chief Technology Officer

MisterArt.com LP

http://www.misterart.com

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve Totaro
Sent: Tuesday, September 28, 2004 4:53 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] BudgeTone 100 & Call Transfer

 

I do not think that anything is special in the confs.  

 

There is no supervised transfer so you should just be able to hit transfer,
extension, and then immediately press transfer again.

 

Check that in the admin webpage for the phone that you have the box checked
that says "Advanced features supported on phone" or something to that effect
(I cant remember the exact verbage)

 

If that works, let me know.  If  not I will detail all of my settings.

 

Thanks,

Steve

----- Original Message ----- 

From: Marco <mailto:marco at misterart.com>  Nicolayevsky 

To: 'Asterisk Users Mailing List - <mailto:asterisk-users at lists.digium.com>
Non-Commercial Discussion' 

Sent: Monday, September 27, 2004 8:22 PM

Subject: RE: [Asterisk-Users] BudgeTone 100 & Call Transfer

 

Steve,

 

I believed that during my trials I tried that but it didn't work. Basically,
I hit TRANSFER, got a dial tone, dialed the other party's extension and it
began to rang. Once they picked up, I hit transfer again. I cant remember if
it took me back to the original call, or just dropped the call altogether.
Either way, it didn't work.

 

Do the phones require any special setup in the confs?

 

thanks,

 

Marco

 

 


  _____  


From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve Totaro
Sent: Monday, September 27, 2004 6:22 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] BudgeTone 100 & Call Transfer

Press transfer, then dial extension and press transfer again (not flash)  I
dont even include the # option in any of my implementations because it
screws up DTMF based IVR systems.  I was once trying to get an SSL cert and
had much difficulty because I was required to press # and * wanted to
transfer the call.

 

 

----- Original Message ----- 

From: Wiley E. Siler <mailto:wsiler at e2020inc.com>  

To: Asterisk Users Mailing List - <mailto:asterisk-users at lists.digium.com>
Non-Commercial Discussion 

Sent: Monday, September 27, 2004 4:58 PM

Subject: RE: [Asterisk-Users] BudgeTone 100 & Call Transfer

 

Blind transfer can be achieved by just hitting # and the number you wish to
transfer to.

 

How did you lose the call?  Did you hit Flash again or Transfer to complete
the action?

 

W

 


  _____  


From: Marco Nicolayevsky [mailto:marco at misterart.com] 
Sent: Monday, September 27, 2004 1:50 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] BudgeTone 100 & Call Transfer

Hello all,

 

Does anyone know how to successfully transfer a call using the GrandStream
Budgetone 100 phones? I've read multiple posts talking about hitting flash,
the dialing, then flash again, etc. Some posts talk about using the transfer
button, then dial, then flash.

 

Anyways, it seems that I am able to put the caller on hold (whereas they
hear hold music) by pressing flash or transfer. Then, I am able dial another
extension, and start talking to them.

 

Where I run into trouble is when I try to connect both parties, and take
myself out of the mix. All of my attempts have led to dropped calls.

 

Any suggestions/Advice would be appreciated.

 

-Marco

 

 

------------------------------------------

Marco Nicolayevsky

Chief Technology Officer

MisterArt.com LP

http://www.misterart.com

 

 

 


  _____  


The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you received
this in error, please contact the sender and delete the material from any
computer


  _____  


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


  _____  


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

!DSPAM:4159349947271165412630! 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040928/4c8d1de6/attachment.htm


More information about the asterisk-users mailing list