[Asterisk-Users] UK (British Telecom) Caller ID again

[Edward Eastman]

If you have a TDM400 + FXO Modules with recent CVS head ALL you should have
to do is:

usecallerid=yes
cidsignalling=v23
cidstart=polarity

in your zapata.conf

I have this working absolutely fine at the moment.

The X100P makes life a bit more difficult, because it doesn't detect
polarity reversal (which signals the start of CID data in the UK iirc) and I
think you'll need an extra patch to make this work (although it's a little
unclear) - one of the patches on
http://bugs.digium.com/bug_view_page.php?bug_id=0000009 may work, although
I've not tried it at all.

HTH

Ed

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Patrick
Lidstone (Personal e-mail)
Sent: 28 September 2004 13:22
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] UK (British Telecom) Caller ID again

I've followed the recent thread on caller id with UK British Telecom
networks (where the caller id data is delivered before the first ring).
My understanding is that if I use a recent CVS head (e.g.
CVS-HEAD-09/18/04-17:45:52) and a TDM400 with FXO modules, all I need to
do is include the line:

usecallerid=uk 

In my zapata.conf (in the [channels] section)

I've done this, but I get:

Sep 28 13:08:02 NOTICE[20498]: chan_zap.c:5119 ss_thread:  Got event 2
(Ring/An
wered)...
    -- Detected ring pattern: 247,97,0
    -- Executing Dial("Zap/4-1", "zap/1&zap/2&zap/5|120|Ttr") in new
stack
    -- Called 1
    -- Called 2
    -- Called 5
    -- Zap/1-1 is ringing
    -- Zap/2-1 is ringing
    -- Zap/5-1 is ringing
    -- Zap/1-1 is ringing
    -- Zap/2-1 is ringing
    -- Zap/5-1 is ringing
    -- Zap/1-1 is ringing
    -- Zap/2-1 is ringing
Sep 28 13:08:03 WARNING[20498]: chan_zap.c:3404 zt_handle_event:  Didn't
finish
Caller-ID spill.  Cancelling.

I know for certain that caller id is working on this line. Any pointers
on where I am going wrong, or how I can effectively debug this? I've
also tried including the legacy "ukcallerid=yes" in zapata.conf. It
makes no difference. If I can arrive at a definitive solution, I'll post
it to the wiki.

Many thanks,

Patrick

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users