[Asterisk-Users] BudgeTone 100 & Call Transfer

[Marco Nicolayevsky]

Steve,
 
I believed that during my trials I tried that but it didn't work. Basically,
I hit TRANSFER, got a dial tone, dialed the other party's extension and it
began to rang. Once they picked up, I hit transfer again. I cant remember if
it took me back to the original call, or just dropped the call altogether.
Either way, it didn't work.
 
Do the phones require any special setup in the confs?
 
thanks,
 
Marco
 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve Totaro
Sent: Monday, September 27, 2004 6:22 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] BudgeTone 100 & Call Transfer


Press transfer, then dial extension and press transfer again (not flash)  I
dont even include the # option in any of my implementations because it
screws up DTMF based IVR systems.  I was once trying to get an SSL cert and
had much difficulty because I was required to press # and * wanted to
transfer the call.
 
 

----- Original Message ----- 
From: Wiley E.  <mailto:wsiler at e2020inc.com> Siler 
To: Asterisk Users Mailing List -  <mailto:asterisk-users at lists.digium.com>
Non-Commercial Discussion 
Sent: Monday, September 27, 2004 4:58 PM
Subject: RE: [Asterisk-Users] BudgeTone 100 & Call Transfer

Blind transfer can be achieved by just hitting # and the number you wish to
transfer to.
 
How did you lose the call?  Did you hit Flash again or Transfer to complete
the action?
 
W

  _____  

From: Marco Nicolayevsky [mailto:marco at misterart.com] 
Sent: Monday, September 27, 2004 1:50 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] BudgeTone 100 & Call Transfer



Hello all,

 

Does anyone know how to successfully transfer a call using the GrandStream
Budgetone 100 phones? I've read multiple posts talking about hitting flash,
the dialing, then flash again, etc. Some posts talk about using the transfer
button, then dial, then flash.

 

Anyways, it seems that I am able to put the caller on hold (whereas they
hear hold music) by pressing flash or transfer. Then, I am able dial another
extension, and start talking to them.

 

Where I run into trouble is when I try to connect both parties, and take
myself out of the mix. All of my attempts have led to dropped calls.

 

Any suggestions/Advice would be appreciated.

 

-Marco

 

 

------------------------------------------

Marco Nicolayevsky

Chief Technology Officer

MisterArt.com LP

http://www.misterart.com

 

 

 



  _____  




The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you received
this in error, please contact the sender and delete the material from any
computer



  _____  




_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

!DSPAM:4158a0a8136201317712263! 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040927/2aae6964/attachment.htm