[Asterisk-Users] agents and queues

[Asterisk]

Marco,

I don't have an answer just yet - there must be a "bugette" somewhere in the 
agent system, as static entries don't work whilst dynamic entries do. I've 
printed out the source code, and am looking through it. I'll let you all 
know ..

Julian
----- Original Message ----- 
From: "Marco Nicolayevsky" <marco at misterart.com>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" 
<asterisk-users at lists.digium.com>
Sent: Monday, September 27, 2004 9:46 PM
Subject: RE: [Asterisk-Users] agents and queues


> Julian,
>
> I too am using static agent entries in the queues.conf file.
>
> So, what are the options? Dynamically add the agents via AddQueueMember?
> Will this solve my original problem of callers visiting empty queues?
>
> Can anyone provide a snippet of code from their extensions.conf file in
> which it shows the agents being dynamically added/removed from the queues,
> as well as the +101 jump to voice mail?
>
> If this works, it would provide a better alternative that what I was 
> working
> on, which is to use the manager CLI to determine if there are agents. Then
> put an IF in the dialplan to check for agents before taking them to the
> queue.
>
> Thanks in advance,
>
> Marco
>
>
> ------------------------------------------
> Marco Nicolayevsky
> Chief Technology Officer
> MisterArt.com LP
> http://www.misterart.com
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Asterisk
> Sent: Monday, September 27, 2004 8:29 AM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: RE: [Asterisk-Users] agents and queues
>
>
> I can confirm that if you have a member added in the queues.conf file, 
> then
> the queue command does return as if there is a member. Removing the static
> definition makes the q command return properly.
>
> Julian
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Robert 
> Jackson
> Sent: 27 September 2004 13:13
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] agents and queues
>
>
>> -----Original Message-----
>> From: João Amaro [mailto:ashes at gildot.org]
>> Sent: Monday, September 27, 2004 5:16 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [Asterisk-Users] agents and queues
>>
>>
>> *
>> *As you see,
>> *"  Returns 0 if the queue is full, nonexistant, or has no members.\n"
>> *when it happens, you can have a priority n+1 which sends the call to
>> the voicemail. That's what i'm doing with my callcenter.
>>
>>
> Unfortunately this doesn't seem to hold true in our situation.
> This method only worked for me when I did not define any members
> in queues.conf, and added any members with AddQueueMember.
> However when I add queue members with Member => Agent/101 in
> queues.conf the Queue command always returns as if there were a
> member.
>
> This is only my experience, and you could be correct.
>
> Robert Jackson
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
> !DSPAM:41581599255961429013692!
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>