[Asterisk-Users] Move Over Asterisk - Ondo is Here. - Email fromBrekeke Announcing their RTP Proxy

[Steve Underwood]

Well maybe you should be a user. I offer much less than *, at only a 
much greater cost :-)

I think this is a bit like advertising Windows XP on the Linux kernel 
mailing list :-)

Regards,
Steve


Steve Totaro wrote:

>I am not an OnDo user.  Please do not spam me.
>
>
>----- Original Message ----- 
>From: "SeshKanuri" <seshkanuri at hotmail.com>
>To: "Asterisk Users Mailing List - Non-Commercial Discussion"
><asterisk-users at lists.digium.com>
>Sent: Saturday, September 25, 2004 4:47 AM
>Subject: [Asterisk-Users] Move Over Asterisk - Ondo is Here. - Email
>fromBrekeke Announcing their RTP Proxy
>
>
>  
>
>>Dear Valued OnDO users,
>>
>>====================================================
>>OnDO PBX v1.3 now supports 100 concurrent calls
>>====================================================
>>
>>Brekeke is excited to announce our new OnDO PBX v1.3
>>with increased concurrent call capacity that is 4 times
>>greater than the current release version OnDO PBX v1.2.
>>
>>--
>>
>>How did Brekeke increase the capacity by so much?  -- RTP relay
>>
>>OnDO PBX is well regarded among many users for its ease of use and
>>administration. But we felt it needed to be spiced up to make our users
>>and customers even happier. As you may know,
>>Real-Time Transport Protocol (RTP) is commonly used for transmitting
>>audio data for VoIP telephony. Until this version of OnDO PBX, all RTP
>>packets were relayed through OnDO PBX. By minimizing the RTP packet
>>traffic that go through OnDO PBX, we have succeeded in increasing the
>>number of concurrent calls.
>>
>>You may ask how do we achieve this? By adopting DTMF-via-INFO method,
>>we succeeded in decreasing the number of packets going through the server.
>>All RTP packets are sent and received directly between SIP UAs,
>>establishing peer to peer connections between them. Whenever an OnDO PBX
>>user needs to send commands to forward calls or to put calls on hold, the
>>information will be carried through SIP packets as INFO messages.
>>For the phone or in situations where sending DTMF-via-INFO is not
>>    
>>
>possible,
>  
>
>>OnDO PBX provides the option to turn "RTP relay" on or off from the OnDO
>>PBX Admintool.
>>
>>--
>>
>>Keep your "Favorites" with OnDO -- Brekeke offers "NO restriction" value
>>    
>>
>to
>  
>
>>our customers
>>
>>Many VoIP products come with a series of strings attached, and the strings
>>usually cost you more money. Brekeke strives hard to create products that
>>won't restrict users' choice of phones, operating system platforms, or
>>hardware
>>equipment. As a result, we have a wide variety of users that use our
>>products
>>with their favorite list of products. With new OnDO PBX v1.3, we reserve
>>    
>>
>the
>  
>
>>flexibility and openness of OnDO, yet enhance the possibility of OnDO
>>products.
>>OnDO PBX v1.3 is a super-sized version, so to speak.
>>
>>--
>>
>>Questions about installing/using OnDO PBX? We know that it's a commitment
>>on your part to learn about new software, so we'd like to help you!
>>    
>>
>Brekeke
>  
>
>>Software offers a solution to technical support: an ONLINE FORUM THAT
>>ALLOWS YOU TO DIRECTLY COMMUNICATE WITH OUR ENGINEERS.
>>At Brekeke Software, we're always happy to help our users setup and
>>configure
>>their OnDO PBX systems for an optimal VoIP experience.
>>
>>Please post your technical questions in our support forum, and we'll get
>>back to you as soon as we can. Brekeke Software is committed to offering
>>    
>>
>you
>  
>
>>an unmatched level of support.
>>http://www.brekeke.com/en/support/supportforum_en.html
>>
>>--
>>
>>www.brekeke.com
>>
>>For sales information, please contact us at
>>sales at brekeke.com
>>
>>Questions? Comments? Feedback? We'd love to hear from you!
>>feedback at brekeke.com
>>********************************************************************
>>Please do not reply to this email.
>>
>>You have received this email from Brekeke Software Inc because you
>>registered to receive periodic news and updates that we believe may be of
>>interest to you.
>>
>>TO UNSUBSCRIBE:
>>Please send a blank email to unsubscribe at brekeke.com and you will be
>>removed from our list.
>>
>>Copyright 2002-2004 Brekeke Software, Inc.
>>All Rights Reserved.
>>    
>>