[Asterisk-Users] TDM channel shows Offhook when I plug it to the telco

[Rich Adamson]

If I recall correctly, the problem with fxo port 1 is a hardware
design issue with early TDM cards. Call digium support to confirm.

------------------------
> I had a similar problem but not exactly same: when telco lines are
> plugged into the FXO ports, initially "zap show channel 1" says it is
> "Onhook" but I cannot make outgoing calls.  Once I unplug the telco
> line and re-plug it, or after there is an incoming call, "zap show
> channel 1" says "Offhook" but both incoming and outgoing calls work
> fine.  I believe this is related to a incomplete fix to bug #2359 but
> my limited knowledge does not enable me to track down or fix the
> problem.
> 
> 
> ----- Original Message -----
> From: Felix Pizarro <felix_pizarro at yahoo.com>
> Date: Fri, 24 Sep 2004 08:53:20 -0700 (PDT)
> Subject: [Asterisk-Users] TDM channel shows Offhook when I plug it to the telco
> To: asterisk-users at lists.digium.com
> 
> 
> Hello, everyone
>  
> I am having problems with a TDM400 that has 3 fxs modules and 1 fxo. 
> When plug a line from the telco to the fxo module it changes state
> from onhook to offhook, and of course I can not receive any calls. 
> (When I tried to call from the outside to that line it shows as busy).
>  Could someone help me? I am at the customers site ;(
>  
> Thanks a lot
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

---------------End of Original Message-----------------