[Asterisk-Users] Problems compiling CAPI

[igil at itranser.com]

Hello all,

I'm trying to setup a AVM C2 card.

I have read the kernel requirements for this card.


<M> CAPI2.0 support 
[*] Verbose reason code reporting (Kernel size +=7K) 
[*] CAPI2.0 Middleware support (EXPERIMENTAL) 
<M> CAPI2.0 /dev/capi support 
[*] CAPI2.0 filesystem support 
<M> CAPI2.0 capidrv interface support 

My problem is when I make a "make menuconfig" in /usr/src/linux/, i can't 
see 
any reference to CAPI2.0 filesystem support, in my kernel, 2.4.18 (Debian 
stable).

When I make a capiinit, to test the AVM card, it says,

debian-asterisk:~# capiinit
modprobe: Can't locate module capifs
modprobe: Can't locate module capifs
WARNING: filesystem capifs not available
/lib/modules/2.4.18/kernel/drivers/isdn/avmb1/b1pci.o: init_module: No 
such device
Hint: insmod errors can be caused by incorrect module parameters, 
including invalid IO or IRQ parameters
/lib/modules/2.4.18/kernel/drivers/isdn/avmb1/b1pci.o: insmod 
/lib/modules/2.4.18/kernel/drivers/isdn/avmb1/b1pci.o failed
/lib/modules/2.4.18/kernel/drivers/isdn/avmb1/b1pci.o: insmod b1pci failed
ERROR: failed to load driver b1pci
ERROR: controller 1: firmware file "c4.bin" not found
ERROR: controller 2: firmware file "-" not found
ERROR: failed to load firmware for controller 1 driver c2 name c2-d400
ERROR: failed to load firmware for controller 2 driver c2 name c2-d400

As you can see, the first error is "can`t locate module capifs".

What i am doing wrong?


Any clue will be apreciated.

Regards

Ismael Gil
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040922/5eeb7351/attachment.htm