[Asterisk-Users] Red Alarm on X100P

[Brent Franks]

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Mark C. Thomas
> Subject: Re: [Asterisk-Users] Red Alarm on X100P
> 
> I haven't tried disconnecting the phone line, I'll try that
> next time.
> If it was a co problem, I wouldn't think reloading the
> wcfxo module would have fixed it - or would it?
> 
> Thanks for the info...
> > >         TDM400P  REV E/F
> > >         X100P (X101P)
> > >         PII-450
> > >
> > >         Linux version 2.6.8-gentoo-r3
> > >         gcc version 3.3.4 20040623
> > >         Asterisk CVS-HEAD-09/05/04-09:28:57

Hi Mark,

We had a similar issue about a year ago.  We eventually figured out that
our Promise Array (ATA RAID) Controller cards were causing the X100P
card to go into RedAlarm.  It would come out on its own sometimes,
others not.  What other PCI cards / Hardware are you using in your
server.

Also, as polite request for everyone else in this thread (and others),
please do not Top Post.  Please also cut out irrelevant sections of the
e-mail when you reply.  Finally, get rid of the Auto Sigs (including
Yahoo, Asterisk-Users, etc) everytime you reply, it will get put back on
its own.

People will be able to respond much quicker to you, rather than taking
time on their own format the message and then respond to help.  Clean it
up for them, so they can just reply with the requested help...  enough
ranting :)

- Brent