[Asterisk-Users] IP phones AT-723 or AT-323

[Craig Guy]

Looked at one of these phones about a month ago (the ATA 323, haven't seen
the ATA 723), the base unit is very light and the rubber stoppers are crap
so the phone slides across the desk whenever you pickup the handset.  There
was no visual MWI (message waiting indicator) on the phone and the default
firmware load was primitive - although config was via telnet, web or tftp,
new firmware had to be upgraded by ftp (not tftp), the firmware from the
website had a name that was different from what the phone asked for and had
a space as the first character - ' phone.bin' was what the phone was
requesting rather than 'phone.bin'.  The new firmware gave nicer features
like web interface based firmware loading (still no tftp though) but changed
the dialtone from a standard type tone to a horrible type buzzing noise.
They were cheaper than the Granstreams but a little bit too 'cheap' if you
know what I mean.

Craig
----- Original Message ----- 
From: "Joseph" <syscon at interbaun.com>
To: <asterisk-users at lists.digium.com>
Sent: Wednesday, September 22, 2004 1:43 AM
Subject: [Asterisk-Users] IP phones AT-723 or AT-323


> Is anybody familiar with these IP phones AT-723 or AT-323
> I think it is made by this company:
> http://www.atcom.com.cn/at723E.html
>
> -- 
> #Joseph
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users