[Asterisk-Users] Suppressing CallerID in .call files

[Henry Devito]

Unfortunately in my area call-by-call blocking caller id is not an option on
ISDN PRI,  I did do a small work around for phones that I wanted to block
Caller ID from.  I took one of my DID numbers and made the CSID that number,
I had the LEC not send a name with that number.  I did not define that DID
in *,  by not defining the DID in * it caused the LEC to send a reject to
the calling party.  Depending on what LEC the calling party was using they
either got a busy signal or a recording saying that number is not valid. 

Hope this helps

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Christian
Victor
Sent: Tuesday, September 21, 2004 9:55 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Suppressing CallerID in .call files

Henry Devito schrieb:

> Most LEC's & CLEC's, at least in our area, require sending a number (CSID)
> before the call is completed.  This is do to E911 features and ANI.  If
you
> do not send a number the call will fail.  If you truly want to block
caller
> ID I would contact your carrier and they should be able to block it on
their
> level. 

Right - I discussed this with my PSTN carrier lately. Now the Problem is 
that I want to decide on a per call basis if I send a CallerID or not.

Chris
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users