[Asterisk-Users] Uniden UIP 200

[Jonathan Moore]

I just wanted to followup on this issue.

1) The reboots with callwaiting on where a result of using an older version of
the unidenmac file from a previous firmware.
2) There is still an issue even with 4.59a with callwaiting off and the message
lamp that will also cause the phone to reboot. If you turn off call waiting and
the message light, and don't use a mailbox= line in sip.conf the reboots are
pretty rare.
3) By using the advice below I think I have the problem resolved with the
message light on and callwaiting on and managing call flow with the checkgroup
setgroup combo.

I also want to say that Uniden was pretty quick to respond to me on this issue.
I couldn't get through at all via the standard support number, but call the
number listed in the initial Press release got me to the correct people. Uniden
seems to have an * test system and they were willing to attempt to duplicate the
problem by using my configs. So there is at least some awareness at Uniden that
people are using this on *. 


-- 
Jonathan Moore
Director of Technology
Winfield Public Schools
Office 620.221.5100
Fax 620.221.0508


Quoting Ryan Courtnage <ryan at voxbox.ca>:

> Jonathan Moore wrote:
> 
> > Unfortunately we missed on big problem with Call waiting in our testing.
> When
> > using asterisk 0.9.1 or rc2 the phone will reboot when you hit the flash
> button
> > to roll over to the second call. 
> 
> We were experiencing random uip200 rebooting after upgrading the phone 
> firmware.  It usually happened when dialing.
> 
> Uniden suggested using the 'Factory Reset' menu option on the phones. 
> This did eliminate the phone rebooting we were seeing.
> 
> > Secondly if I want to be able to do flash transfers with the phone, but not
> be
> > bothered with having call waiting buzz in my ear is there a way to
> configure
> > asterisk to make this happen?
> 
> There is no 'call waiting on/off' switch in *.  You can, however, use 
> logic to ensure that * never sends a call to a phone that is in-use.
> 
> There are several ways to do this.  An easy way is to implement 
> SetGroup/CheckGroup in the dialplan:
> 
> http://voip-info.org/wiki-Asterisk+cmd+SetGroup
> 
> Ryan
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 


Visit Winfield Public Schools at http://usd465.com
-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/