[Asterisk-Users] Timing source on SMP system - DisableRTC forzaprtc

[Chad Brown]

Yes, I tried adding an adaptec that I thought was uhci. This didn't
work. I didn't check the specs but figured that they would be uhci given
the history of ohci.

Regardless, I will confirm with adaptec.

Thanks,
Chad

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kristian
Kielhofner
Sent: Sunday, September 19, 2004 6:27 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Timing source on SMP system - DisableRTC
forzaprtc

Chad Brown wrote:

> Kristian,
> 
> I have 2 X100P cards but neither work on my Compaq DL360 G2. The
system
> will not even boot! Take a look at my initial post and let me know if
> you have any other advice. Regardless, thanks for your post!
> 

Oh that was you?  I read that post earlier but obviously didn't put it 
together...  I don't know about this, but have you tried an add-on 
usb-uhci controller (your motherboard is OHCI, right)?  I don't know if 
that would work, but you could try it...  What about a TDM400 with a 
module (any module FXS/FXO)?

--
Kristian Kielhofner
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users