[Asterisk-Users] Re: Asterisk-Users Digest, Vol 2, Issue 163

[Angel Diaz]

 Hi Matt,
    I have verified with ztmonitor the audio level and it was too low, then
with this the fax machine report "Not Response". I modified the audio level
in zapata.conf and after that the fax machine report "Commnunication Error".

Do you an idea what could be ?
Thanks,
Angel.

> Message: 3
> Date: Sat, 18 Sep 2004 00:48:23 +1200
> From: matt.riddell at sineapps.com
> Subject: Re:Re: [Asterisk-Users] Fax and Asterisk
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> <asterisk-users at lists.digium.com>
> Message-ID: <414B85D7.29122.5EA177 at localhost>
> Content-Type: text/plain; charset=US-ASCII
>
> On 17 Sep 2004 at 8:29, Angel Diaz wrote:
>
> > Hi  Matt Riddell
> >                     Here you have the write permission for all
> >
> > "drwxrwxrwx    2 root     root         4096 Sep 14 16:09 incoming" And
> > about your question;  How long does it time out for?  It stay there
> > without hang up until I switch off the fax machine. I have installed
> > tiff-v3.6.0 and spandsp-0.0.1k.tar.gz and performed all steps
> > described by Steve Underwood. Thanks, Angel.
>
> LOL the permissions shouldn't be a problem.
>
> >Redirecting Zap/1-1 to fax extension
>
> Isn't this line supposed to say detected fax, redirected to fax
> extension?  Are you doing anything weird in Extensions.conf?
>
> Also check the volume of the incoming audio by typing:
>
> /usr/src/zaptel/ztmonitor x -v
>
> (where x is the incoming channel i.e 1 or 2 or 3 etc)
>
> The bar should go pretty close to the right hand side of the line,
> but shouldn't sit at the top.
>
> How's it look for you?
>
> Matt Riddell
> (New Zealand Digium Distribution/Custom Software)
> http://www.sineapps.com/contact.php (contact us)
> http://www.sineapps.com/news.php (daily asterisk news)
>
> > > Message: 6
> > > Date: Fri, 17 Sep 2004 12:29:10 +1200
> > > From: matt.riddell at sineapps.com
> > > Subject: Re: [Asterisk-Users] Fax and Asterisk
> > > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > > <asterisk-users at lists.digium.com>
> > > Message-ID: <414AD896.31950.AE7E96 at localhost>
> > > Content-Type: text/plain; charset=US-ASCII
> > >
> > > On 15 Sep 2004 at 15:10, Angel Diaz wrote:
> > > > Hi all,
> > > >     I have problems with rxfax application. It seems to be ok but
> > > >     I don't receive the fax in my directory.
> > > > My extension.conf is as follow:
> > > >
> > > -- SNIP --
> > > > And my log is :
> > > > -- Executing Answer("Zap/1-1", "") in new stack
> > > > -- Executing BackGround("Zap/1-1", "00") in new stack
> > > > -- Playing '00' (language 'es')
> > > > -- Redirecting Zap/1-1 to fax extension
> > > > == Spawn extension (reception, fax, 0) exited non-zero on
> > > > 'Zap/1-1' -- Executing Goto("Zap/1-1", "fax1|100|1") in new stack
> > > > -- Goto (fax1,100,1) -- Executing Macro("Zap/1-1", "fax") in new
> > > > stack -- Executing SetVar("Zap/1-1",
> > > > "FAXFILE=/var/spool/asterisk/incoming/1095285200.16.tif") in new
> > > > stack -- Executing RxFAX("Zap/1-1",
> > > > "/var/spool/asterisk/incoming/1095285200.16.tif") in new stack
> > > >
> > > > and after that, it stay there without time out. Any suggestion  ?
> > >
> > > It's probably receiving the fax.  How long does it time out for?
> > > Who can write to that directory (assuming you've created
> > > /var/spool/asterisk/incoming/)?
> > >
> > > Cheers,
> > >
> > > Matt Riddell
>