[Asterisk-Users] H323 dialing makes Asterisk crash

[Danny Zak]

Hello Jeremy,

thanks for your remark..

this is what i get out of it ...


--

#0  0x41f57c50 in oh323_new (i=0x80f8f50, state=0,
    host=0x449e5147 "213.xxx.202.xxx") at chan_h323.c:625
625     chan_h323.c: No such file or directory.
        in chan_h323.c


#0  0x41f57c50 in oh323_new (i=0x80f8f50, state=0,
    host=0x449e5147 "213.xxx.202.xxx") at chan_h323.c:625
#1  0x41f583b5 in oh323_request (type=0x449e5bdc "H323", format=256,
    data=0x449e598c) at chan_h323.c:793
#2  0x0805c330 in ast_request (type=0x449e5bdc "H323", format=4, data=0x100)
    at channel.c:1844
#3  0x40fd53d0 in dial_exec (chan=0x812c5c0, data=0x449e5bdc)
    at app_dial.c:711
#4  0x08072136 in pbx_exec (c=0x812c5c0, app=0x41008ab0, data=0x449e7e2c,
    newstack=1) at pbx.c:467
#5  0x08079e0e in pbx_extension_helper (c=0x812c5c0,
    context=0x812c718 "default", exten=0x0, priority=1,
    callerid=0x80f8998 "\"admin\" <portdanny>", action=1090701488)
    at pbx.c:1271
#6  0x0807406a in ast_pbx_run (c=0x4102c8b0) at pbx.c:1752
#7  0x0807a4d1 in pbx_thread (data=0x100) at pbx.c:1971
#8  0x4002a2b6 in start_thread () from /lib/tls/libpthread.so.0
--

i did recompile the h323 that is in the h323 dir; and everything goes
smooth there ...

i have worked in the past with h323 connection to a gatekeeper; but
that was just for testing ...

the h323.conf file contains gatekeeper=DISABLED

-- 
Best regards,
 Danny                            mailto:dannyz at belgonet.com

belGOnet.com  a  Euro-pictures  division - internet solutions
place princesse elisabeth 9/11   -   1030 Brussels  - Belgium
Tel : +32-(0)2-215.67.65      -      Fax : +32-(0)2-215.66.65

domains - hosting - hardware - VoiP - consultancy - backuping
CISCO - HP/COMPAQ - SUN - EMC - JUNIPER - IBM - DELL - NORTEL


No  legal  consequences  can be derived from the contents of the email
neither  is  belGOnet.com committed to them. The content of this email
is  exclusively  intended  for  adressee(s)  and information purposes.
belGOnet.com  accepts  no  liability for any damage resulting from the
use and/or acceptation of the content of this email.


Thursday, September 16, 2004, 11:12:52 PM, you wrote:

JM> Danny Zak wrote:

>> Hello Asterisk list;
>> 
>> when i DIAL(H323/phone at gateway) i get this strange error
>> 
>> --
>>  -- Executing Dial("SIP/home-0953",
>> "H323/32221xxxx5 at 213.xxx.202.xxx|5|r") new stack
>> backupns*CLI>
>> Disconnected from Asterisk server
>> --
>> 
>> Asterisk just goes down..



JM> You are going to have to provide more debug information than that.


JM> Make absolutely sure you have followed the instructions in 
JM> asterisk/channels/h323/README



JM> Jeremy McNamara