[Asterisk-Users] Red Alarm - Config Zaptel card

[Lyle Giese]

You don't have a T1 connected to the card or you are using a wrong cable or...  A red alarm says 'I don't like the signal coming in from the far end'.  

Could be no signal, could be incompatible signaling options, could be wiring issues, could be most anything.

Lyle
  ----- Original Message ----- 
  From: Murali 
  To: asterisk-users at lists.digium.com ; asterisk-users-request at lists.digium.com 
  Sent: Monday, September 13, 2004 5:40 AM
  Subject: [Asterisk-Users] Red Alarm - Config Zaptel card


  hi all,

  can anyone give solution for this.

    wct1xxp -  Digium Wildcard T100P T1/PRI Card 0





  zttool gives

  RED            Digium Wildcard T100P T1/PRI Card 0  




  my zaptel.conf look like this

  span=1,1,0,esf,b8zs
  bchan=1-23
  dchan=24
  loadzone=us
  defaultzone=us

  the above 5 lines only placed in my zaptel.conf file


  Regards 
  Murali

   


------------------------------------------------------------------------------


  _______________________________________________
  Asterisk-Users mailing list
  Asterisk-Users at lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040913/7d6050db/attachment.htm