ASTERISK - RE: [Asterisk-Users] Call Parking Problem

[PHP Mechanic]

That fixed it. Thanks

> The 'parkedcalls' code dynamically creates and deletes entries in the
> dialplan to handle the calls that have been parked, so the parking lot
must
> not overlap your regular extensions. The initial parking extension is
> statically created on startup, thus the 'exten =>' entry is matching the
> parking slot digits and throwing the congestion error - remove it or edit
> /etc/asterisk/features.conf to move the parking lot.
>
> Either way, there is a fair amount missing from the extensions.conf you
> posted. I suggest you troll through http://www.voip-info.org
>
> > -----Original Message-----
> > From: PHP Mechanic [mailto:oliver.bode at phpmechanic.com]
> > Sent: September 10, 2004 7:27 AM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: [Asterisk-Users] Call Parking Problem
> >
> > Hi,
> >
> > I'm unable to pick up parked calls after they are transfered.
> >
> > I get the "transfer" message when I press # and then I'm told
> > "701" The
> > extension I'm dialing goes to the on hold music. I'm
> > disconnected, I hang
> > up, dial "701" and I see this message on the console "Everyone is
> > busy/congested at this time"
> >
> > I just have the default parkedcalls file, and have this in
> > the extensions.
> >
> > [AnalogPhone]
> > exten => _70X,1,Dial(Zap/1/${EXTEN},20,Ttr)
> > include => parkedcalls
> >
> > [SipPhone]
> > exten => _70X,1,Dial(SIP/1/${EXTEN},20,Ttr)
> > include => parkedcalls
> >
> {clip}
>