[Asterisk-Users] DevKit TDM400P module won't load

[Colin Haxton]

Hi all,

I have just purchased the DevKit from Digium and received a X100P and a
TDM400P (it has one FXS module).  

The problem is that I can't get the kernel module (wcfxs) to load and
run.  I have searched the archives and can't find anything about this. 
Do the messages below ring any bells with anyone ?

There is no interrupt clash (see pci list below).  I am running on a AMD
1.2G processor, 2.6 kernel.  The motherboard is a MSI K7T Turbo2, which
is PCI 2.2, I flash upgraded the bios to the latest version just in
case.

Can anyone help?  I am at a loss what to try next and I don't want to
end up throwing away my new toy.  :)

Thanks,

Colin

/--dmesg-------------------------------------------------
zaptel: no version for "struct_module" found: kernel tainted.
Zapata Telephony Interface Registered on major 196
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 17 (level, low) -> IRQ 17
Freshmaker version: 71
00 != ff
01 != ff
02 != ff
03 != ff
04 != ff
05 != ff
<snip>
f2 != ff
f3 != ff
f4 != ff
f5 != ff
f6 != ff
f7 != ff
f8 != ff
f9 != ff
fa != ff
fb != ff
fc != ff
fd != ff
fe != ff
Freshmaker failed register test
wcfxs: probe of 0000:00:08.0 failed with error -5
----------------------------------------------------/

/---proc/pci-----------------------------------------
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev
3).
      Master Capable.  Latency=8.
      Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
  Bus  0, device   1, function  0:
    PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
(rev 0).
      Master Capable.  No bursts.  Min Gnt=12.
  Bus  0, device   7, function  0:
    ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 64).
  Bus  0, device   7, function  1:
    IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 6).
      Master Capable.  Latency=32.
      I/O at 0xd000 [0xd00f].
  Bus  0, device   7, function  2:
    USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 26).
      IRQ 11.
      Master Capable.  Latency=32.
      I/O at 0xd400 [0xd41f].
  Bus  0, device   7, function  3:
    USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (#2) (rev 26).
      IRQ 11.
      Master Capable.  Latency=32.
      I/O at 0xd800 [0xd81f].
  Bus  0, device   7, function  4:
    Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 64).
      IRQ 7.
  Bus  0, device   8, function  0:
    Network controller: Individual Computers - Jens Schoenfeld Intel 537
(rev 0).
      IRQ 17.
      Master Capable.  Latency=32.  Min Gnt=1.Max Lat=128.
      I/O at 0xdc00 [0xdcff].
      Non-prefetchable 32 bit memory at 0xe4000000 [0xe4000fff].
  Bus  0, device  13, function  0:
    Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
(rev 36).
      IRQ 18.
      Master Capable.  Latency=32.  Min Gnt=10.Max Lat=10.
      I/O at 0xe000 [0xe07f].
      Non-prefetchable 32 bit memory at 0xe8001000 [0xe800107f].
  Bus  1, device   0, function  0:
    VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX
440-SE] (rev 163).
      IRQ 16.
      Master Capable.  Latency=32.  Min Gnt=5.Max Lat=1.
      Non-prefetchable 32 bit memory at 0xe5000000 [0xe5ffffff].
      Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff].
      Prefetchable 32 bit memory at 0xd8000000 [0xd807ffff].
---------------------------------------------------------------------------/