[Asterisk-Users] Asterisk Conferencing using g729

[William Suffill]

Roger,

I haven't had any problems doing confs w/ g729. My guess is the Sipura
is asking for ulaw first. Try adjusting the codec priority on the
sipura side. IF you still have problems I an get my spa-3000 out and
trying and solve it for you.

-- William


----- Original Message -----
From: box100 <box100 at easlick.com>
Date: Mon, 6 Sep 2004 00:28:50 -0400
Subject: [Asterisk-Users] Asterisk Conferencing using g729
To: asterisk-users at lists.digium.com


Could anyone who has successfully configured Asterisk to use g729 to
conference 10-20 people please post their configs. I purchased and
successfully installed 2 g729 licenses and but when I dial into my
conference number on the Asterisk box from a SPA-2000 set to allow all
codecs, it always appears to connect using ULAW.
  
My iax.conf file includes the following under the general section 
  
disallow=all 
bandwidth=low 
allow=g729 
allow=ulaw 
  
Thanks, 
Roger Easlick 

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users