[Asterisk-Users] SMS & Asterisk - an explanation

[Scott Stingel]

Hi Julian-

I was using a BT BRI line, with caller ID option enabled.  Also, I had to
send 1470 before the call because my customer had blocked his outgoing
number on this line.

So I'm certain that it works on BRI.  BT says in their SIN document
(Supplier's Information Note), number 413, that analogue lines and both ISDN
2e and 30e can provide this service.  See paragraph 3.2 of this document.

Here's the link:  http://www.sinet.bt.com


Regards
Scott 


Scott M. Stingel
President,
Emerging Voice Technology, Inc.
Palo Alto California & London England
www.evtmedia.com 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Asterisk
Sent: Wednesday, September 01, 2004 12:02 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] SMS & Asterisk - an explanation

I tried to send sms messages the other day from a * box connected to a E1
line (BT ISDN30).

Message never arrived, however, I was soon called back on the E1 by an
automated BT system which sent a message stating that "you cannot send sms
messages on this line"

Is there anything I need to do before I start sending text messages ? Is it
the ISDN30 that is the problem, and do I need to send SMS via standard lines
(pots) or ISDN2e lines ?

Julian.