[Asterisk-Users] Asterisk SIP between two networks

[Sergio Serrano]

Hi all, 

	I have any information more. I have configured sip.conf with
bindaddr=0.0.0.0. I have observed traffic with tethereal and I have seen
the next. First REGISTER goes out from my asterisk to my SIP Provider.
My SIP Provider respond to my with a 401 Unauthorized meesage, but
Asterisk doesn't read this message and try to resend first REGISTER.

In the second localnet(in previous message) there is a Hicom Siemens
with a HG1500 interface with Intel propietary protocol, but without SIP
protocol. I have noticed that this interface goes down when I start
asterisk.

	Has anyone had same problem? Could anyone help me with this
problem?

Best regards,
srsergio

-----Mensaje original-----
De: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] En nombre de Sergio
Serrano
Enviado el: miércoles, 01 de septiembre de 2004 0:46
Para: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Asunto: [Asterisk-Users] Asterisk SIP between two networks


Hi all,
	I have next configuration:

		SIP Provider<--------------->ADSL router<---localnet
192.168.20.0--->ASTERISK<---localnet 172.24.240.0--->softphones

		first localnet 192.168.20.0
		second localnet 172.28.240.0
	in second localnet we have softphone and the first localnet is
connected to ADSL router to connect to our SIP provider.

The problem is the next:
	if I put in [general] section in sip.conf, bindaddr=0.0.0.0, I
can't register in my SIP provider. If I put 192.168.20.10 in bindaddr I
can register in my SIP provider but softphones can't register into
asterisk. I 'm using asterisk RC1. 
	
	Any idea?

srsergio

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users