[Asterisk-Users] Problem - Adtran TSU 600, t100p

[Bartosz Jozwiak]

> > On Tue, 25 May 2004, Bartosz Jozwiak wrote:
> >
> > >Hello,
> > >
> > >I have just received Adtran TSU 600 with 24 FXS ports.
> > >I have installed sucessfuly T100P card.
> >
> > Sucessfully?
> > Did you load the module for the card?
>
> Yes
>
> > What does 'ztcfg -v' show?
>
> ast05:~# ztcfg -vvv
>
> Zaptel Configuration
> ======================
>
> SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>
> Channel map:
>
> Channel 01: FXO Kewlstart (Default) (Slaves: 01)
> Channel 02: FXO Kewlstart (Default) (Slaves: 02)
> Channel 03: FXO Kewlstart (Default) (Slaves: 03)
> Channel 04: FXO Kewlstart (Default) (Slaves: 04)
> Channel 05: FXO Kewlstart (Default) (Slaves: 05)
> Channel 06: FXO Kewlstart (Default) (Slaves: 06)
> Channel 07: FXO Kewlstart (Default) (Slaves: 07)
> Channel 08: FXO Kewlstart (Default) (Slaves: 08)
> Channel 09: FXO Kewlstart (Default) (Slaves: 09)
> Channel 10: FXO Kewlstart (Default) (Slaves: 10)
> Channel 11: FXO Kewlstart (Default) (Slaves: 11)
> Channel 12: FXO Kewlstart (Default) (Slaves: 12)
> Channel 13: FXO Kewlstart (Default) (Slaves: 13)
> Channel 14: FXO Kewlstart (Default) (Slaves: 14)
> Channel 15: FXO Kewlstart (Default) (Slaves: 15)
> Channel 16: FXO Kewlstart (Default) (Slaves: 16)
> Channel 17: FXO Kewlstart (Default) (Slaves: 17)
> Channel 18: FXO Kewlstart (Default) (Slaves: 18)
> Channel 19: FXO Kewlstart (Default) (Slaves: 19)
> Channel 20: FXO Kewlstart (Default) (Slaves: 20)
> Channel 21: FXO Kewlstart (Default) (Slaves: 21)
> Channel 22: FXO Kewlstart (Default) (Slaves: 22)
> Channel 23: FXO Kewlstart (Default) (Slaves: 23)
> Channel 24: FXO Kewlstart (Default) (Slaves: 24)
>
> 24 channels configured.
>
>
> > Is asterisk running?  Does asterisk see the ports? (zap show channels)
>
> This is the following:
> *CLI> zap show channels
> Chan Extension  Context         Language   MusicOnHold
>    1            default                    default
>    2            default                    default
>    3            default
>    4            default
>    5            default
>    6            default
>    7            default
>    8            default
>    9            default
>   10            default
>   11            default
>   12            default
>   13            default
>   14            default
>   15            default
>   16            default
>   17            default
>   18            default
>   19            default
>   20            default
>   21            default
>   22            default
>   23            default
>   24            default
>
>
>
> >
> > >Adtran is connected to t100p with crossover T1 cable.
> > >On T100P card I have a green light and on Adtran I do not get any
> > >errors or alarms.
> > >But I do not get dialtone on FXS ports.
> > >
> > >Adtran is configured: For Network Timing, fxs ports ore fxs_ls on
Adtran.
> > >
> > >In zaptel.conf:
> > <snip>
> >
> >

Still having the same problem. I was palying around with span but it did not
help.
I have no idea anymore what could be wrong. Can some body be so kind and
point me somewhere what I am doing worng.