[Asterisk-Users] Problem - Adtran TSU 600, t100p

[Bartosz Jozwiak]

> On Tue, 25 May 2004, Bartosz Jozwiak wrote:
>
> >Hello,
> >
> >I have just received Adtran TSU 600 with 24 FXS ports.
> >I have installed sucessfuly T100P card.
>
> Sucessfully?
> Did you load the module for the card?

Yes

> What does 'ztcfg -v' show?

ast05:~# ztcfg -vvv

Zaptel Configuration
======================

SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Slaves: 04)
Channel 05: FXO Kewlstart (Default) (Slaves: 05)
Channel 06: FXO Kewlstart (Default) (Slaves: 06)
Channel 07: FXO Kewlstart (Default) (Slaves: 07)
Channel 08: FXO Kewlstart (Default) (Slaves: 08)
Channel 09: FXO Kewlstart (Default) (Slaves: 09)
Channel 10: FXO Kewlstart (Default) (Slaves: 10)
Channel 11: FXO Kewlstart (Default) (Slaves: 11)
Channel 12: FXO Kewlstart (Default) (Slaves: 12)
Channel 13: FXO Kewlstart (Default) (Slaves: 13)
Channel 14: FXO Kewlstart (Default) (Slaves: 14)
Channel 15: FXO Kewlstart (Default) (Slaves: 15)
Channel 16: FXO Kewlstart (Default) (Slaves: 16)
Channel 17: FXO Kewlstart (Default) (Slaves: 17)
Channel 18: FXO Kewlstart (Default) (Slaves: 18)
Channel 19: FXO Kewlstart (Default) (Slaves: 19)
Channel 20: FXO Kewlstart (Default) (Slaves: 20)
Channel 21: FXO Kewlstart (Default) (Slaves: 21)
Channel 22: FXO Kewlstart (Default) (Slaves: 22)
Channel 23: FXO Kewlstart (Default) (Slaves: 23)
Channel 24: FXO Kewlstart (Default) (Slaves: 24)

24 channels configured.


> Is asterisk running?  Does asterisk see the ports? (zap show channels)

This is the following:
*CLI> zap show channels
Chan Extension  Context         Language   MusicOnHold
   1            default                    default
   2            default                    default
   3            default
   4            default
   5            default
   6            default
   7            default
   8            default
   9            default
  10            default
  11            default
  12            default
  13            default
  14            default
  15            default
  16            default
  17            default
  18            default
  19            default
  20            default
  21            default
  22            default
  23            default
  24            default



>
> >Adtran is connected to t100p with crossover T1 cable.
> >On T100P card I have a green light and on Adtran I do not get any
> >errors or alarms.
> >But I do not get dialtone on FXS ports.
> >
> >Adtran is configured: For Network Timing, fxs ports ore fxs_ls on Adtran.
> >
> >In zaptel.conf:
> <snip>
>
>
> Good luck,
>
> Steve

It look ok isn't it ?