AW: [Asterisk-Users] Missing digits on TDM400P incomplete dial string - DTMF problem?

[Hiep Doan]

I have the same problem in Spain, but I did not start to change any config.
Is this problem because of the phone or because of the TDM card? Did u get a
solution?

Hiep

> -----Ursprüngliche Nachricht-----
> Von: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> admin at lists.digium.com] Im Auftrag von bam
> Gesendet: Freitag, 7. Mai 2004 19:31
> An: asterisk-users at lists.digium.com
> Betreff: RE: [Asterisk-Users] Missing digits on TDM400P incomplete dial
> string - DTMF problem?
> 
> I turned down the rxgain and txgain to -22.0 and -16.0 respectively and
> things  started to look a whole lot more acceptable. Then the client
> sticks
> on his BT DECT phone and I start losing all the "1"s from the dial string.
> 
> 
> Does anyone know if BT DECT phones have dodgy DTMF tones?
> 
> At 17:19 07/05/04, you wrote:
> >I've  had a quick fiddle to little avail, the readings looked prey good
> to
> >be honest before I started fiddling. Looking a little closer it appears
> >that it is the digit "1" that is being lost more that any other.
> >
> >
> >
> >At 15:25 07/05/04, you wrote:
> >>Run /usr/src/zaptel/ztmonitor 32 -v
> >>And adjust your gains in /etc/asterisk/zapata.conf accordingly.
> >>
> >>Gregory P. Scasny
> >>
> >>Golden Technologies Inc.
> >>
> >>http://www.golden-tech.com
> >>
> >>219-462-7200
> >>
> >>-----Original Message-----
> >>From: asterisk-users-admin at lists.digium.com
> >>[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of bam
> >>Sent: Friday, May 07, 2004 3:35 AM
> >>To: asterisk-users at lists.digium.com
> >>Subject: [SPAM] - [Asterisk-Users] Missing digits on TDM400P incomplete
> >>dial string - Email found in subject
> >>
> >>We are experiencing problems on a FXS interface where the client is
> >>dialing
> >>numbers, but digits are being dropped somewhere from the dial string.
> >>Typically one or two digits are not being presented. We've tried
> >>different
> >>handsets to no avail, and I am assuming that it is some sort of timing
> >>problem.
> >>
> >>Are there any parameters I can tweak to try and rectify this?
> >>
> >>
> >>zapata.conf
> >>
> >>context=hardwire
> >>group=3
> >>signalling=fxo_ks
> >>mailbox=8765
> >>callerid="Acme" <8765>
> >>channel=32
> >>
> >>
> >>
> >>
> >>extensions.conf
> >>
> >>[hardwire]
> >>;
> >>exten => _NXXXXXX,1,SetCallerID(0141411${CALLERIDNUM})
> >>exten => _NXXXXXX,2,CallingPres(3)
> >>exten => _NXXXXXX,3,Dial(Zap/g1/0141${EXTEN})
> >>
> >>exten => _0.,1,SetCallerID(0141411${CALLERIDNUM})
> >>exten => _0.,2,CallingPres(3)
> >>exten => _0.,3,Dial(Zap/g1/${EXTEN})
> >>
> >>exten => t,1,Hangup                     ; If they take too long, give
> >>up.
> >>exten => i,1,Hangup                     ; If they get it wrong, give up
> >>
> >>
> >>_______________________________________________
> >>Asterisk-Users mailing list
> >>Asterisk-Users at lists.digium.com
> >>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>To UNSUBSCRIBE or update options visit:
> >>    http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >>
> >>_______________________________________________
> >>Asterisk-Users mailing list
> >>Asterisk-Users at lists.digium.com
> >>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>To UNSUBSCRIBE or update options visit:
> >>    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users