[Asterisk-Users] Missing digits on TDM400P incomplete dial
string - DTMF problem?
bam
bam at cqm.co.uk
Fri May 7 10:30:30 MST 2004
I turned down the rxgain and txgain to -22.0 and -16.0 respectively and
things started to look a whole lot more acceptable. Then the client sticks
on his BT DECT phone and I start losing all the "1"s from the dial string.
Does anyone know if BT DECT phones have dodgy DTMF tones?
At 17:19 07/05/04, you wrote:
>I've had a quick fiddle to little avail, the readings looked prey good to
>be honest before I started fiddling. Looking a little closer it appears
>that it is the digit "1" that is being lost more that any other.
>
>
>
>At 15:25 07/05/04, you wrote:
>>Run /usr/src/zaptel/ztmonitor 32 -v
>>And adjust your gains in /etc/asterisk/zapata.conf accordingly.
>>
>>Gregory P. Scasny
>>
>>Golden Technologies Inc.
>>
>>http://www.golden-tech.com
>>
>>219-462-7200
>>
>>-----Original Message-----
>>From: asterisk-users-admin at lists.digium.com
>>[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of bam
>>Sent: Friday, May 07, 2004 3:35 AM
>>To: asterisk-users at lists.digium.com
>>Subject: [SPAM] - [Asterisk-Users] Missing digits on TDM400P incomplete
>>dial string - Email found in subject
>>
>>We are experiencing problems on a FXS interface where the client is
>>dialing
>>numbers, but digits are being dropped somewhere from the dial string.
>>Typically one or two digits are not being presented. We've tried
>>different
>>handsets to no avail, and I am assuming that it is some sort of timing
>>problem.
>>
>>Are there any parameters I can tweak to try and rectify this?
>>
>>
>>zapata.conf
>>
>>context=hardwire
>>group=3
>>signalling=fxo_ks
>>mailbox=8765
>>callerid="Acme" <8765>
>>channel=32
>>
>>
>>
>>
>>extensions.conf
>>
>>[hardwire]
>>;
>>exten => _NXXXXXX,1,SetCallerID(0141411${CALLERIDNUM})
>>exten => _NXXXXXX,2,CallingPres(3)
>>exten => _NXXXXXX,3,Dial(Zap/g1/0141${EXTEN})
>>
>>exten => _0.,1,SetCallerID(0141411${CALLERIDNUM})
>>exten => _0.,2,CallingPres(3)
>>exten => _0.,3,Dial(Zap/g1/${EXTEN})
>>
>>exten => t,1,Hangup ; If they take too long, give
>>up.
>>exten => i,1,Hangup ; If they get it wrong, give up
>>
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list