[Asterisk-Users] New TDM04B 4-port FXO card problems

[Roger Gulbranson]

On Sat, 2004-05-01 at 23:57, Roger Gulbranson wrote:
> On Sat, 2004-05-01 at 23:28, Scott Weis wrote:
> > >
> 
> > > 4. Incoming pstn calls that either go to IVR menues or VM do not properly
> > >    sense disconnect supervision. Again, monitoring the pstn line via the
> > >    LEDs on an analog phone "does" indicate approximately .5 second of
> > >    no-battery (disconnect). After the disconnect, * does not release the
> > >    pstn line which then causes dial tone from the Central Office to be
> > >    recorded in the VM, etc. The CLI does not indicate a hangup until
> > >    _after_ the sip phone hangs up. MAJOR Problem, and reported to support.
> > >
> > 
> > I worked with Mark today and this problem is now fixed in the CVS.
> 
> I just downloaded the most recent CVS, compiled, removed modules, and
> reloaded.
> 
> Problem still persists.

I see Mark just posted a new fix.  Problem now resolved (at least for
me).  Thanks.