[Asterisk-Users] New TDM04B 4-port FXO card problems

[Scott Weis]

Here is the bug ID I posted: Add comments I guess

http://bugs.digium.com/bug_view_page.php?bug_id=0001522
----- Original Message ----- 
From: "Roger Gulbranson" <roger at gulbranson.com>
To: <asterisk-users at lists.digium.com>
Cc: "Roger Gulbranson" <roger at gulbranson.com>
Sent: Saturday, May 01, 2004 11:57 PM
Subject: Re: [Asterisk-Users] New TDM04B 4-port FXO card problems


> On Sat, 2004-05-01 at 23:28, Scott Weis wrote:
> > >
>
> > > 4. Incoming pstn calls that either go to IVR menues or VM do not
properly
> > >    sense disconnect supervision. Again, monitoring the pstn line via
the
> > >    LEDs on an analog phone "does" indicate approximately .5 second of
> > >    no-battery (disconnect). After the disconnect, * does not release
the
> > >    pstn line which then causes dial tone from the Central Office to be
> > >    recorded in the VM, etc. The CLI does not indicate a hangup until
> > >    _after_ the sip phone hangs up. MAJOR Problem, and reported to
support.
> > >
> >
> > I worked with Mark today and this problem is now fixed in the CVS.
>
> I just downloaded the most recent CVS, compiled, removed modules, and
> reloaded.
>
> Problem still persists.
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>