[Asterisk-Users] Multiple IAX "register" lines?

[WipeOut]

Rich Adamson wrote:

>Gus,
>
>  
>
>>There is nothing to it really register lines are pretty simple..
>>
>>register => user1:pass1 at server1.domain1.tld
>>register => user2:pass2 at server2.domain2.tld
>>
>> From the cli "iax2 show registry" only shows the first entry..
>>
>>These are for inbound services not outbound, I didn't think it was 
>>nesesary to "register" for outbound calls because the call is being 
>>initiated from inside..
>>    
>>
>
>If the iax destination site is static, you don't even need the registration
>process. Simply set up a type=user (for inbound iax calls) with some
>appropriate security parameters (host, secret, context). The associated
>extensions.conf entry might look something like:
>  exten => _9.,1,Dial(IAX2/userid:mysecret at 1.2.3.4/${EXTEN:1})
>which will connect with type=user just fine. Have several of these in 
>production.
>
>Of coarse, if you don't have access/cooperation to the remote iax2 servers,
>or if any site is using dynamic IP addresses, then your stuck with
>resolving the original registration problem. (Does a "iax2 debug" show
>anything useful?)
>
>Rich
>
>
>  
>
Thats the problem I have a dynamic IP on my side which is why I need the 
"register" line in the iax.conf..

iax2 debug shows that it is registering the first line but not the second..

Later..