[Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails

[Dominique Kull]

been playing around with the Pulver firmware WF.00.11/B.00.13/Apr 07 
2004 and its not better in any way. Anbody made some progress with that 
issue? I guess we will have to wait for ZyXEL releasing a real 
production FW.

cheers
Dominique

Dominique Kull wrote:

> Thanks for your replies. The hangup is still failing with the latest CVS 
> head. It seems to be a firmware issue. I am running WJ.00.0a / B.00.13 / 
> Apr 12 2004 - Is there any newer release of the firmware floating around?
> 
> cheers
> Dominique
> 
> PS:
> Another interesting effect(IMHO bug): I cannot access the web interface 
> after some time unless I make a call first. The same applies for pinging 
> the handset. It only will reply after call has been established. Might 
> be a power save feature... :-)
> 
>  >> -----Ursprüngliche Nachricht-----
>  >> Von: asterisk-users-admin at lists.digium.com 
> [mailto:asterisk-users-admin at lists.digium.com] Im Auftrag von Pertti 
> Pikkarainen
>  >> Gesendet: Donnerstag, 3. Juni 2004 08:26
>  >> An: asterisk-users at lists.digium.com
>  >> Betreff: Re: [Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails
>  >>
>  >>
>  >> Prestige 2000W  is the same BCM phone that was earlier referred as 
> Wifi-600 in this list.
>  >>
>  >> http://www.bcm.com.tw/product/pdf/pdf1/Spec-WiFi600_2003_1103.pdf
>  >>
>  >> It has the same problem. If you enable WEP encryption ( 104 bit ), 
> the voice becomes very choppy. Almost unusable. Without WEP it is fine.
>  >>
>  >> I wonder if anybody has better results with WEB enabled and with 
> latest software releases  ?
>  >>
>  >> -- Pertti
>  >>
>  >>
>  >> Lars Boegild Thomsen wrote:
>  >>
>  >>
>  >>> I have noticed this one and I have also informed ZyXEL, but their 
> response was vague to say the least.  It is correct that the ZyXEL phone 
> does not send a SIP Cancel when you disconnect an
>  >>
>  >>
>  >> outgoing call
>  >>
>  >>> that has not yet been picked up by the remote end.
>  >>>
>  >>> I have several times asked ZyXEL to put a formal bug report
>  >>
>  >>
>  >> procedure
>  >>
>  >>> in place with proper tracking but to no avail.
>  >>>
>  >>> Regards,
>  >>>
>  >>>     Lars...
>  >>>
>  >>>
>  >>>
>  >>>
>  >>>> -----Original Message-----
>  >>>> From: asterisk-users-admin at lists.digium.com
>  >>>> [mailto:asterisk-users-admin at lists.digium.com]On Behalf Of
>  >>
>  >>
>  >> Dominique
>  >>
>  >>>> Kull
>  >>>> Sent: 02 June 2004 22:46
>  >>>> To: asterisk-users at lists.digium.com
>  >>>> Subject: [Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails
>  >>>>
>  >>>>
>  >>>> Does anybody have any experience with the ZyXEL Prestige
>  >>
>  >>
>  >> 2000W? I am
>  >>
>  >>>> having problems with the line tear down when I call another
>  >>
>  >>
>  >> extension.
>  >>
>  >>>> If nobody picks up at the other end when I hangup the
>  >>
>  >>
>  >> 2000W, the other
>  >>
>  >>>> extension continues to ring. Is there any way to hangup a
>  >>
>  >>
>  >> SIP call if
>  >>
>  >>>> there is no more traffic? Asterisk seems to think that
>  >>
>  >>
>  >> there is still
>  >>
>  >>>> a connection open. This is pretty annoying since it always
>  >>
>  >>
>  >> leaves an
>  >>
>  >>>> empty VM.
>  >>>>
>  >>>> thanks
>  >>>> Dominique
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users


-- 
Dominique Kull
The Old Lodge, London SW6 6EE UK
t: +44 207 731 1562
e: dominique at kull.net