[Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails

[Dominique Kull]

Thanks for your replies. The hangup is still failing with the latest CVS 
head. It seems to be a firmware issue. I am running WJ.00.0a / B.00.13 / 
Apr 12 2004 - Is there any newer release of the firmware floating around?

cheers
Dominique

PS:
Another interesting effect(IMHO bug): I cannot access the web interface 
after some time unless I make a call first. The same applies for pinging 
the handset. It only will reply after call has been established. Might 
be a power save feature... :-)

 >> -----Ursprüngliche Nachricht-----
 >> Von: asterisk-users-admin at lists.digium.com 
[mailto:asterisk-users-admin at lists.digium.com] Im Auftrag von Pertti 
Pikkarainen
 >> Gesendet: Donnerstag, 3. Juni 2004 08:26
 >> An: asterisk-users at lists.digium.com
 >> Betreff: Re: [Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails
 >>
 >>
 >> Prestige 2000W  is the same BCM phone that was earlier referred as 
Wifi-600 in this list.
 >>
 >> http://www.bcm.com.tw/product/pdf/pdf1/Spec-WiFi600_2003_1103.pdf
 >>
 >> It has the same problem. If you enable WEP encryption ( 104 bit ), 
the voice becomes very choppy. Almost unusable. Without WEP it is fine.
 >>
 >> I wonder if anybody has better results with WEB enabled and with 
latest software releases  ?
 >>
 >> -- Pertti
 >>
 >>
 >> Lars Boegild Thomsen wrote:
 >>
 >>
 >>> I have noticed this one and I have also informed ZyXEL, but their 
response was vague to say the least.  It is correct that the ZyXEL phone 
does not send a SIP Cancel when you disconnect an
 >>
 >>
 >> outgoing call
 >>
 >>> that has not yet been picked up by the remote end.
 >>>
 >>> I have several times asked ZyXEL to put a formal bug report
 >>
 >>
 >> procedure
 >>
 >>> in place with proper tracking but to no avail.
 >>>
 >>> Regards,
 >>>
 >>>     Lars...
 >>>
 >>>
 >>>
 >>>
 >>>> -----Original Message-----
 >>>> From: asterisk-users-admin at lists.digium.com
 >>>> [mailto:asterisk-users-admin at lists.digium.com]On Behalf Of
 >>
 >>
 >> Dominique
 >>
 >>>> Kull
 >>>> Sent: 02 June 2004 22:46
 >>>> To: asterisk-users at lists.digium.com
 >>>> Subject: [Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails
 >>>>
 >>>>
 >>>> Does anybody have any experience with the ZyXEL Prestige
 >>
 >>
 >> 2000W? I am
 >>
 >>>> having problems with the line tear down when I call another
 >>
 >>
 >> extension.
 >>
 >>>> If nobody picks up at the other end when I hangup the
 >>
 >>
 >> 2000W, the other
 >>
 >>>> extension continues to ring. Is there any way to hangup a
 >>
 >>
 >> SIP call if
 >>
 >>>> there is no more traffic? Asterisk seems to think that
 >>
 >>
 >> there is still
 >>
 >>>> a connection open. This is pretty annoying since it always
 >>
 >>
 >> leaves an
 >>
 >>>> empty VM.
 >>>>
 >>>> thanks
 >>>> Dominique