[Asterisk-Users] BroadVoice usage?

Jay Milk jay at skimmilk.net
Tue Jun 8 12:58:36 MST 2004 

That's good to know.  However, if I call into my broadvoice number and
pick up the call, I can send and receive DTMF audibly.  Shouldn't that
fall under "inband" signaling and should be taken care of by the
appropriate dtmfmode setting?

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Michael Swan
Sent: Tuesday, June 08, 2004 2:28 PM
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] BroadVoice usage?


Hi,

I have a current call into BroadVoice regarding lack of DTMF
on incoming calls. They are aware of the situation but have
yet to respond.

Michael Swan
Neon Software, Inc.

At 12:48 PM 6/8/2004 -0500, you wrote:
>I have to correct myself here -- this is no longer working.  I know I 
>had it working from my cell-phone at first.  What's interesting is that

>I can HEAR the DTMF go through, both from cell-phone and other sip 
>lines.  I changed it back to inband, but no luck.
>
>-----Original Message-----
>From: asterisk-users-admin at lists.digium.com
>[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Jay Milk
>Sent: Tuesday, June 08, 2004 11:46 AM
>To: asterisk-users at lists.digium.com
>Subject: RE: [Asterisk-Users] BroadVoice usage?
>
>
>I do, see sip.conf below.  My network is multi-NAT, so all DHCP'd 
>machines have one external IP to share, and a small number of servers 
>(including *) get a static internal IP which maps to a static external 
>IP.
>
>[general]
>port = 5060                     ; Port to bind to
>bindaddr = 192.168.254.204      ; Address to bind SIP channel to
>context = incoming              ; Default context for incoming calls
>disallow=all                    ; Disallow all codecs
>allow=gsm
>allow=ulaw                      ; Allow codecs in order of preference
>allow=alaw
>externip = x.x.x.149            ; Address that we're going to put in
>outbound SIP messages
>                                 ; if we're behind a NAT
>localnet = 192.168.254.204      ; Internal NETWORK address
>localmask = 255.255.255.0       ; Internal netmask
>                                 ; The externip, localnet and localmask

>is used
>                                 ; when registering and communication 
>with other proxies
>                                 ; that we're registered with nat=yes
>
>register => xxxxxxx:password at sipgate.de/99049
>register => xxxxxx:password at fwd.pulver.com/99393
>register => 5551231234:password at sip.broadvoice.com/99555
>register => 5561231234:password at sip.broadvoice.com/99556
>register => 5571231234:password at sip.broadvoice.com/99557
>
>[sip99555]
>secret=password
>username=5551231234
>host=sip.broadvoice.com
>type=peer
>nat=yes
>canreinvite=no
>dtmfmode=rfc2833
>fromuser=5551231234
>callerid=5551231234
>context=incoming
>fromdomain=sip.broadvoice.com
>
>(rings to sipura SPA-2000:)
>
>[24]
>type=friend
>username=24
>secret=password
>;mailbox=1000
>host=dynamic
>context=internal
>dtmfmode=rfc2833
>qualify=250
>canreinvite=no
>callerid="Office" <24>
>
>-----Original Message-----
>From: asterisk-users-admin at lists.digium.com
>[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Michael 
>Swan
>Sent: Monday, June 07, 2004 12:24 PM
>To: asterisk-users at lists.digium.com
>Subject: RE: [Asterisk-Users] BroadVoice usage?
>
>
>Hi Greg,
>
>Thanks for the fromuser= and fromdomain= hints. Adding those cleared up

>the problem and we can make and receive calls now.
>
>However, as with Voiceglo, BroadVoice seems to ignore DTMF on incoming 
>calls. It does send DTMF on outgoing calls. I've tried all three 
>dtmfmode values in sip.conf leaving the setting at inband which seems 
>to work for outgoing.
>
>Does anyone else receive DTMF on incoming calls with their BroadVoice 
>account?
>
>Michael Swan
>Neon Software, Inc.
>
>At 10:35 PM 6/4/2004 -0600, you wrote:
> >On Fri, 4 Jun 2004, Michael Swan wrote:
> >
> > > Yes, we do have a context for incoming calls -- it's used for not 
> > > only BroadVoice (which isn't working) and VoiceGlo and 
> > > iConnectHere (which are working.) And, yes, we do have a pattern 
> > > match on our number in our [general] context in extensions.conf. 
> > > As of this morning, when we dial our BroadVoice number, we get a 
> > > fast busy and our Asterisk server is never contacted.
> >
> >similar thing happened when I tried to use voiceglo.. It appeared to 
> >be
>
> >a problem in the provisioning of the phone number. Their tech support

> >never responded to fix it, so I dumped 'em and now use Broadvoice 
> >instead.
> >
> > > As for outgoing, we did make the change to sip.broadvoice.com 
> > > (from proxy.broadvoice.com). This did make a change on our 
> > > outgoing
> > > calls: the BroadVoice server responded with:
> > >          Got SIP response 604 "Does not exist anywhere" back from
> > 147.135.0.129
> > > This is progress but it's still an error. :-( And, no: our 
> > > Asterisk server is not behind a NAT firewall.
> >
> >I don't see fromuser= and fromdomain= in your config below.. try 
> >adding
>
> >those. In the SIP debug, you'll probably see that your asterisk 
> >server is putting From : asterisk at yourhost in the messages to 
> >broadvoice. Their server doesn't like that; it wants to see From: 
> >yournumber at sip.broadvoice.com in the message. fromuser and fromdomain

> >make that happen.
> >
> >
> >PS, a question for Jay. What dtmf mode are you using? I haven't got 
> >dtmf working inbound or out yet.
> >
> >Greg
> >
> >
> > >
> > >
> > >
> > > At 03:04 AM 6/3/2004 -0500, you wrote:
> > > >I have Broadvoice working on three lines.  Had the same problems 
> > > >you have in the beginning.
> > > >
> > > >Trouble-shoot one thing at a time...
> > > >Incoming: Do you have a context for incoming calls set up?  It 
> > > >belongs in your [general] section.  Once there, do you have a 
> > > >pattern or extension matching your phone number?  If Asterisk 
> > > >can't
>
> > > >match the extension for an incoming call, the call is rejected 
> > > >and BV tells you it's busy.
> > > >
> > > >Outgoing: Use host=sip.broadvoice.com.  Don't use proxy.  If your

> > > >asterisk sits behind a NAT firewall, it wouldn't hurt to add 
> > > >"nat=yes" to your [broadvoice] section.
> > > >
> > > >-----Original Message-----
> > > >From: asterisk-users-admin at lists.digium.com
> > > >[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of 
> > > >Michael
>
> > > >Swan
> > > >Sent: Tuesday, June 01, 2004 11:51 AM
> > > >To: asterisk-users at lists.digium.com
> > > >Subject: [Asterisk-Users] BroadVoice usage?
> > > >
> > > >
> > > >Hi all,
> > > >
> > > >I've been trying to use BroadVoice as a SIP service provider. 
> > > >They don't
> > > >
> > > >officially
> > > >support * but are helpful when it comes to answering questions 
> > > >for setup parameters. They claim they have no firewalls or access

> > > >lists
>
> > > >that need to be set up so I can get access to their servers.
> > > >
> > > >However, something's still not quite right when I use the 
> > > >parameters. It looks like our Asterisk server is registered with 
> > > >their server and I believe I have all the other entries set up 
> > > >correctly (we use other services, too, such as iConnectHere and 
> > > >Voiceglo so I'm pretty sure I've got my BroadVoice set up
> > > >correctly.) "sip show registry" shows my * server as registered 
> > > >with the BroadVoice IP address.
> > > >
> > > >When I try to make an outbound call, there is no answer from the 
> > > >BroadVoice server (proxy.boradvoice.com) to Asterisk's INVITE.
> > > >
> > > >When I try to call our assigned BroadVoice number, I immediately 
> > > >get a BroadVoice message saying the number is busy.
> > > >
> > > >I can provide the sip debug output but it basically shows that 
> > > >BroadVoice appears to be not communicating with inbound or 
> > > >outbound
>
> > > >requests.
> > > >
> > > >Here are the entries:
> > > >
> > > >sip.conf
> > > >
> > > >register => 
> > > >phonenumber:password at sip.broadvoice.com:5060/phonenumber
> > > >
> > > >[broadvoice]
> > > >type=friend
> > > >username=phonenumber
> > > >secret=password
> > > >host=proxy.broadvoice.com
> > > >dtmfmode=inband
> > > >disallow=all
> > > >allow=ulaw
> > > >allow=alaw
> > > >
> > > >extensions.conf
> > > >
> > > >; calls via BroadVoice
> > > >exten => _6NXXXXXX,1,Dial,SIP/1925${EXTEN:1}@broadvoice
> > > >exten => _61NXXNXXXXXX,1,Dial,SIP/${EXTEN:1}@broadvoice
> > > >exten => _6011.,1,Dial,SIP/${EXTEN:1}@broadvoice
> > > >exten => _6.,2,Congestion
> > >
> > >
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com 
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com 
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com 
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com 
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

More information about the asterisk-users mailing list