[Asterisk-Users] BroadVoice usage?
Michael Swan
swan at neon.com
Tue Jun 8 12:28:17 MST 2004
Hi,
I have a current call into BroadVoice regarding lack of DTMF
on incoming calls. They are aware of the situation but have
yet to respond.
Michael Swan
Neon Software, Inc.
At 12:48 PM 6/8/2004 -0500, you wrote:
>I have to correct myself here -- this is no longer working. I know I
>had it working from my cell-phone at first. What's interesting is that
>I can HEAR the DTMF go through, both from cell-phone and other sip
>lines. I changed it back to inband, but no luck.
>
>-----Original Message-----
>From: asterisk-users-admin at lists.digium.com
>[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Jay Milk
>Sent: Tuesday, June 08, 2004 11:46 AM
>To: asterisk-users at lists.digium.com
>Subject: RE: [Asterisk-Users] BroadVoice usage?
>
>
>I do, see sip.conf below. My network is multi-NAT, so all DHCP'd
>machines have one external IP to share, and a small number of servers
>(including *) get a static internal IP which maps to a static external
>IP.
>
>[general]
>port = 5060 ; Port to bind to
>bindaddr = 192.168.254.204 ; Address to bind SIP channel to
>context = incoming ; Default context for incoming calls
>disallow=all ; Disallow all codecs
>allow=gsm
>allow=ulaw ; Allow codecs in order of preference
>allow=alaw
>externip = x.x.x.149 ; Address that we're going to put in
>outbound SIP messages
> ; if we're behind a NAT
>localnet = 192.168.254.204 ; Internal NETWORK address
>localmask = 255.255.255.0 ; Internal netmask
> ; The externip, localnet and localmask
>is used
> ; when registering and communication
>with other proxies
> ; that we're registered with nat=yes
>
>register => xxxxxxx:password at sipgate.de/99049
>register => xxxxxx:password at fwd.pulver.com/99393
>register => 5551231234:password at sip.broadvoice.com/99555
>register => 5561231234:password at sip.broadvoice.com/99556
>register => 5571231234:password at sip.broadvoice.com/99557
>
>[sip99555]
>secret=password
>username=5551231234
>host=sip.broadvoice.com
>type=peer
>nat=yes
>canreinvite=no
>dtmfmode=rfc2833
>fromuser=5551231234
>callerid=5551231234
>context=incoming
>fromdomain=sip.broadvoice.com
>
>(rings to sipura SPA-2000:)
>
>[24]
>type=friend
>username=24
>secret=password
>;mailbox=1000
>host=dynamic
>context=internal
>dtmfmode=rfc2833
>qualify=250
>canreinvite=no
>callerid="Office" <24>
>
>-----Original Message-----
>From: asterisk-users-admin at lists.digium.com
>[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Michael Swan
>Sent: Monday, June 07, 2004 12:24 PM
>To: asterisk-users at lists.digium.com
>Subject: RE: [Asterisk-Users] BroadVoice usage?
>
>
>Hi Greg,
>
>Thanks for the fromuser= and fromdomain= hints. Adding those cleared up
>the problem and we can make and receive calls now.
>
>However, as with Voiceglo, BroadVoice seems to ignore DTMF on incoming
>calls. It does send DTMF on outgoing calls. I've tried all three
>dtmfmode values in sip.conf leaving the setting at inband which seems to
>work for outgoing.
>
>Does anyone else receive DTMF on incoming calls with their BroadVoice
>account?
>
>Michael Swan
>Neon Software, Inc.
>
>At 10:35 PM 6/4/2004 -0600, you wrote:
> >On Fri, 4 Jun 2004, Michael Swan wrote:
> >
> > > Yes, we do have a context for incoming calls -- it's used for not
> > > only BroadVoice (which isn't working) and VoiceGlo and iConnectHere
> > > (which are working.) And, yes, we do have a pattern match on our
> > > number in our [general] context in extensions.conf. As of this
> > > morning, when we dial our BroadVoice number, we get a fast busy and
> > > our Asterisk server is never contacted.
> >
> >similar thing happened when I tried to use voiceglo.. It appeared to be
>
> >a problem in the provisioning of the phone number. Their tech support
> >never responded to fix it, so I dumped 'em and now use Broadvoice
> >instead.
> >
> > > As for outgoing, we did make the change to sip.broadvoice.com (from
> > > proxy.broadvoice.com). This did make a change on our outgoing
> > > calls: the BroadVoice server responded with:
> > > Got SIP response 604 "Does not exist anywhere" back from
> > 147.135.0.129
> > > This is progress but it's still an error. :-( And, no: our Asterisk
> > > server is not behind a NAT firewall.
> >
> >I don't see fromuser= and fromdomain= in your config below.. try adding
>
> >those. In the SIP debug, you'll probably see that your asterisk server
> >is putting From : asterisk at yourhost in the messages to broadvoice.
> >Their server doesn't like that; it wants to see From:
> >yournumber at sip.broadvoice.com in the message. fromuser and fromdomain
> >make that happen.
> >
> >
> >PS, a question for Jay. What dtmf mode are you using? I haven't got
> >dtmf working inbound or out yet.
> >
> >Greg
> >
> >
> > >
> > >
> > >
> > > At 03:04 AM 6/3/2004 -0500, you wrote:
> > > >I have Broadvoice working on three lines. Had the same problems
> > > >you have in the beginning.
> > > >
> > > >Trouble-shoot one thing at a time...
> > > >Incoming: Do you have a context for incoming calls set up? It
> > > >belongs in your [general] section. Once there, do you have a
> > > >pattern or extension matching your phone number? If Asterisk can't
>
> > > >match the extension for an incoming call, the call is rejected and
> > > >BV tells you it's busy.
> > > >
> > > >Outgoing: Use host=sip.broadvoice.com. Don't use proxy. If your
> > > >asterisk sits behind a NAT firewall, it wouldn't hurt to add
> > > >"nat=yes" to your [broadvoice] section.
> > > >
> > > >-----Original Message-----
> > > >From: asterisk-users-admin at lists.digium.com
> > > >[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Michael
>
> > > >Swan
> > > >Sent: Tuesday, June 01, 2004 11:51 AM
> > > >To: asterisk-users at lists.digium.com
> > > >Subject: [Asterisk-Users] BroadVoice usage?
> > > >
> > > >
> > > >Hi all,
> > > >
> > > >I've been trying to use BroadVoice as a SIP service provider. They
> > > >don't
> > > >
> > > >officially
> > > >support * but are helpful when it comes to answering questions for
> > > >setup parameters. They claim they have no firewalls or access lists
>
> > > >that need to be set up so I can get access to their servers.
> > > >
> > > >However, something's still not quite right when I use the
> > > >parameters. It looks like our Asterisk server is registered with
> > > >their server and I believe I have all the other entries set up
> > > >correctly (we use other services, too, such as iConnectHere and
> > > >Voiceglo so I'm pretty sure I've got my BroadVoice set up
> > > >correctly.) "sip show registry" shows my * server as registered
> > > >with the BroadVoice IP address.
> > > >
> > > >When I try to make an outbound call, there is no answer from the
> > > >BroadVoice server (proxy.boradvoice.com) to Asterisk's INVITE.
> > > >
> > > >When I try to call our assigned BroadVoice number, I immediately
> > > >get a BroadVoice message saying the number is busy.
> > > >
> > > >I can provide the sip debug output but it basically shows that
> > > >BroadVoice appears to be not communicating with inbound or outbound
>
> > > >requests.
> > > >
> > > >Here are the entries:
> > > >
> > > >sip.conf
> > > >
> > > >register =>
> > > >phonenumber:password at sip.broadvoice.com:5060/phonenumber
> > > >
> > > >[broadvoice]
> > > >type=friend
> > > >username=phonenumber
> > > >secret=password
> > > >host=proxy.broadvoice.com
> > > >dtmfmode=inband
> > > >disallow=all
> > > >allow=ulaw
> > > >allow=alaw
> > > >
> > > >extensions.conf
> > > >
> > > >; calls via BroadVoice
> > > >exten => _6NXXXXXX,1,Dial,SIP/1925${EXTEN:1}@broadvoice
> > > >exten => _61NXXNXXXXXX,1,Dial,SIP/${EXTEN:1}@broadvoice
> > > >exten => _6011.,1,Dial,SIP/${EXTEN:1}@broadvoice
> > > >exten => _6.,2,Congestion
> > >
> > >
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list